RT or minimag

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cardz
    Registered User
    • Apr 2002
    • 14

    #1

    RT or minimag

    Thinking about getting a used automag RT or a mini. Enquiring shooter wants to now. Oh, btw how can I tell a used RT is still under warrenty. Also, whats up with the star warranty and if there are none to be found, what does it mean. Thanks in advance.
  • than205
    Dancer of the kookie jig!
    • Dec 2001
    • 947

    #2
    Most would say get the RT. I would also.
    But in the end thats your decision.
    This link should help with warranty questions:


    Welcome to the forum.
    Thanotos

    http://www.factcheck.org

    Comment

    • BTAutoMag
      AO's Problem Child
      • Oct 2001
      • 7199

      #3
      the question really is...

      CO2 or compressed air
      sigpic

      Comment

      • cardz
        Registered User
        • Apr 2002
        • 14

        #4
        Hey, thanks for the reply.

        I was looking for some comments like this. FOR EXAMPLE: The mini has a history of breaking balls but very reliable. The RT line was the worst engineering done by airgun design and they leak alot. FOR EXAMPLE!!! Thanks for your comments.

        Comment

        • ramsee1
          SouthPaw Extraordanaire
          • Mar 2002
          • 145

          #5
          I found myself in a similar situation. I bought a 68 powerfeed and was looking into getting a retrovalve. I happened to come by a RT for 350.00 and decided what the heck. To make a long story short, the RT is in the mail and whichever one I don't like is getting sold.
          I've come to chew bubble gum and kick @ss... And I'm all out of bubble gum.

          Comment

          • than205
            Dancer of the kookie jig!
            • Dec 2001
            • 947

            #6
            I think we've been taken for a ride.
            Thanotos

            http://www.factcheck.org

            Comment

            • Quiet
              I should shut up now
              • Feb 2002
              • 781

              #7
              The minimag and the RT are essentially the same beyond the valve, no great performance issues. There is a reason the RT valve is a lot more expensive than the AIR valve, it's lighter, recharges faster, and gives you a reactive trigger.

              Go with the RT (preference), the minimags are pretty darn good though.

              Comment

              • Morph16620
                Registered User
                • Jan 2002
                • 5

                #8
                The mini has a history of breaking balls but very reliable
                What do you base this information on?

                I'll agree with reliable, but history of breaking balls?

                Comment

                • cardz
                  Registered User
                  • Apr 2002
                  • 14

                  #9
                  Morph, if you read the thread correctly. My comments were example of comments and not facts or opinions. Merely, a direction of opinion or comments I am looking for to base my decision on. Do you have any preference between the two?

                  Comment

                  • Daniel Morse
                    Team Sweep/RT to the core
                    • Nov 2000
                    • 202

                    #10
                    Hey Cardz,

                    do us all a favor and find a new forum for yourself because your lack of insight, experience, knowledge, and a brain are not sought after qualities around here. My brother and I both shoot RT's for the past four years and have never changed an o-ring. We play on a team where we just about all have RT's and none of us have ever had a leak. Besides the fact that if it was not for the RT you would not have the E-Mag, SFL, Extreme, or RT Pro. All of these guns are centered around the same valve that was introduced in the original RT. So please go buy a Spider and leave this forum at once. Thanks.
                    RT
                    Z-Grip, Max-Flo 4500psi 88cu
                    New AGD longer bolt
                    Lapco Bigshot 12"
                    12v X-Board Revolution with Warp Feed
                    Steel braided hose with on gun input gauge
                    Psychoballistics Drop Forward

                    http://hometown.aol.com/dj112495/myhomepageindex.html

                    Comment

                    • ramsee1
                      SouthPaw Extraordanaire
                      • Mar 2002
                      • 145

                      #11
                      Not that I'm defending him or anything, but I don't think he was puting mags down. I THINK (again could be wrong) that he just wanted to know if the markers had any inherent problems.
                      I've come to chew bubble gum and kick @ss... And I'm all out of bubble gum.

                      Comment

                      • Morph16620
                        Registered User
                        • Jan 2002
                        • 5

                        #12
                        oops

                        You're correct. I did read your post wrong, my bad.

                        Thanks for clearing that up.

                        I personally would want a Mini with a RT valve in it. I just like the looks of them better. You also would not have to run nitro right off the bat if you got a mini. Although it should be on the top of your "to get" list, unless you already have it. You could also just upgrade the mini later with a Retro valve making them just about the same gun anyway. Just depends on which one you like the looks of better.
                        Last edited by Morph16620; 05-01-2002, 11:58 AM.

                        Comment

                        • Croix71
                          Registered User
                          • Mar 2002
                          • 717

                          #13
                          Since your dealing with used items how much and what condition are they in?






                          lead, follow, or


                          get the Hell out of MY way!

                          - quote stolen from sleepingbeauty

                          Comment

                          • cardz
                            Registered User
                            • Apr 2002
                            • 14

                            #14
                            For the classic RT, around $350 depending what else it comes with. But usually, it comes with a aftermarket barrel and either a 45 grip or a drop forward. As for the RT pro, about $400.
                            Again depends what it comes with. Should I be worrying about warranty?
                            As for abuse, unfortunatly, I am buying this over the internet. I can only take the word of the seller. Their definition of slightly used is different than a buyers slightly used.
                            If there are problems with it, how hard and expensive will it be to fix? Major body parts are kinda expensive.

                            P.S Let me clear things up with this thread before it becomes unconstructive. The comments I made at the beginning of the thread was only an EXAMPLE, NOT fact, NOT opinion. I do not want a flaming war. I've being scorch already...stake a folk in me, I done

                            Comment

                            • oneshot
                              UW-Whitewater Paintball
                              • Sep 2001
                              • 767

                              #15
                              go with the rt
                              Team Exotic Elements

                              Got Ace?

                              Comment

                              Working...