It seems someone at Dye decidedto make the hole where the safety spring & bearing go, too small for the screw that holds it all in place. Anyone got any suggestions?
-
I'm way too old for this ****. -
Yes, if you want to bother.
Put the ball in there as normal. Then use 2 springs. The springs are kept in by the main rail as you put the grip on the rail. Remember to watch for the springs when you take the grip off the rail. -
yea dye didn't even bother to thread that holeComment
-
People still use safetys?
Comment
-
Yeah really, i just turn the power feed plug to close it and shoot out my last shot. I guess it would be useful if you had a vert. feed or something.http://www.automags.org/forums/showt...light=feedback
My girlfriend said that if i bought another paintball gun, she'd leave me........ I sure am going to miss her.Comment
-
I usually find twisting the barrel works pretty well too
Comment
-
same thing is wrong with mineComment
-
Its not wrong...
Its not wrong and they didn't forget anything. These frames are made from the specs that AGD allowed Dye to have a LONG TIME AGO...before there was a set screw to hold the safety spring. You need to tap the hole with a 4-40 Tap and use your old safety parts. If anyone need help with this just let me know...I have done hundreds of them.....
Last edited by Tunaman; 05-07-2002, 03:55 PM.Comment
-
i got it tapped and put it back in but i hated it so i sook it out again
COWABUNGAAAA!!!!!Comment
-
Ewwww...... Dye frames. Did you know that they void the warrenty on your marker(or so I have heard. I heard that Dye frames and Diamond Labs frame void it). Get Intelliframe if you can, you get a trigger(oowwwwwhhhh) and a safety(ahhhhhhhh). Intelliframes are (now for the old, underused word) far-out !
3-D Pong's bro!
Originally posted by Restola
Why can't I just be in charge of the world?
Captain, Tremor Comment
-
Well, the dye cost me half what the intelli would have... w/ any luck I'll win one saturday!! Or better yet, an e-mag!I'm way too old for this ****.Comment
Comment