hows this setup sound?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RT_Luver
    Co-Official AO Penguin
    • Jan 2002
    • 1827

    #1

    hows this setup sound?

    OK, I know, I know, I know. I've asked this about 5 times now, BUT i'm about to order a couple things for it and i wanna make sure its kewl and all. Ok the setup is

    Red C&C extreme E-mag
    AGD 68 3000 Flatline tank
    AGD flatline dove tail mount
    black shocktech full length dropforward
    AGD smoke warp feed
    red 12v revy w/ JMJ vortex impeller and WAS 12v turbo revy board

    I was also give consideration to a couple changes, what do you think

    red freak tip
    red warp

    what do ya'll think. as you can see, i'm goin for the red and black coloring scheme. any input will be greatly appreciated
    Black Warp Left E-mag #EM00163
    emagnum board
    14in freak
    12v smoke warp w/ interlink
    drilled 12v revy w/ JMJ impeller and WAS turbo rev board
    shocktech drop
    AGD flatline dovetail adaptor
    68 3000 flatline

    ***soon to be***
    emagnum body rail
    black powder coat
    custom grips from Frymarker
  • HoppysMag
    Hoppy's en Fuego!!!
    • Oct 2001
    • 3494

    #2
    o so you did decide to go with the red and black scheme... sounds awsome...id say get a black back an a red all american tip
    "You have not converted a man because you have silenced him." -John Morley

    Comment

    • Xen

      #3
      well I got to hold a extreme today at AGD and it was LIGHT

      didn't get to fire it tho, it was going to the AGD booth I think.

      Only suggestion is the 88/4500 flatline, they are the length of a 68 but fatter. they look nice, thats the only thing.

      you will put a lot of paint in that awesome mag and you will need all the air you can get

      Comment

      • RT_Luver
        Co-Official AO Penguin
        • Jan 2002
        • 1827

        #4
        anyone else?
        Black Warp Left E-mag #EM00163
        emagnum board
        14in freak
        12v smoke warp w/ interlink
        drilled 12v revy w/ JMJ impeller and WAS turbo rev board
        shocktech drop
        AGD flatline dovetail adaptor
        68 3000 flatline

        ***soon to be***
        emagnum body rail
        black powder coat
        custom grips from Frymarker

        Comment

        • I <3 MAGS
          AO addict
          • Jan 2002
          • 452

          #5
          Just my opinion.

          It looks like your ready to throw down some serious cash for this new setup so why go with the 68/3000? If you can I would deffenitly go with the 4500 flatline. If not then wait to save up the extra cash. You will feel better about it in the long run. Other than that, I am VERY jealous.
          :cool: :D AO member 4 life :cool: :D

          Comment

          • RT_Luver
            Co-Official AO Penguin
            • Jan 2002
            • 1827

            #6
            yea, my dad knows A LOT of peole around here (he's an insurance broker and does almost every companies insurance in the tri-cities) so he was sayin he could probably get me a job although I'm only 15(well almost ) and he could probab;y get me a good paying one so I will have some money to spend THANKFULLY for once. bout the 4500, its like another 90 dollars between that and the 3000. I would like it but I'm spending enuf s is and everything that 90 dollars is actually quiet a bit,lol. If I canmange it I'll probably get one but I dont know. I'm also not a very big fan of that pewter color they have. any chance of being able to get that annodized?
            Black Warp Left E-mag #EM00163
            emagnum board
            14in freak
            12v smoke warp w/ interlink
            drilled 12v revy w/ JMJ impeller and WAS turbo rev board
            shocktech drop
            AGD flatline dovetail adaptor
            68 3000 flatline

            ***soon to be***
            emagnum body rail
            black powder coat
            custom grips from Frymarker

            Comment

            • I <3 MAGS
              AO addict
              • Jan 2002
              • 452

              #7
              Even if you don't like the color, you will be kicking yourself in the @$$ later. Trust me. I just sold my flat line 68/3000 to buy an 88/4500 PMI. HEHE!! Thats a crap load more paint to be shooting. YAYAYAYA!!!

              No seriously, get what you will be happy with. If you carry more than 600 rounds (give or take 50) on to the field be prepared to be let down with 3000 psi. It also depends on what position you play or what type of playing you do. Just don't buy something that within a short amount of time you will be regretting your decision.
              :cool: :D AO member 4 life :cool: :D

              Comment

              • RT_Luver
                Co-Official AO Penguin
                • Jan 2002
                • 1827

                #8
                tru tru...you know about how much gas an e-mag uses on every ball shot? I usually carry about 200 rounds in my hopper(plus a full warp) and 3 150 round tubes(I can carry up to 5, but then its gets really heavy by the middle of the day) and if I shoot that much a game, unless I'm in a tourny that supplies you with all the paint you need, I'll be leaving really quickly because paint is expensive here. 75 buks for 2000 rounds
                Black Warp Left E-mag #EM00163
                emagnum board
                14in freak
                12v smoke warp w/ interlink
                drilled 12v revy w/ JMJ impeller and WAS turbo rev board
                shocktech drop
                AGD flatline dovetail adaptor
                68 3000 flatline

                ***soon to be***
                emagnum body rail
                black powder coat
                custom grips from Frymarker

                Comment

                • RT_Luver
                  Co-Official AO Penguin
                  • Jan 2002
                  • 1827

                  #9
                  OH, and at our field I usually get all day air, which means we get as many tank fills as we want. so if I'm filling in between each game I'm fine. it only takes about 20 secs to fill up and we get about 5 minutes after each game. and if their gettin close to startin another game, the fill station isn't but 10 feet from the field so it's not like I can't run and get there. and I used to shoot about 750 balls every game w/ my RT PRO and all I used was a 3000. I guess what I'm sayin is I'll be fine with a 3000. and if not, in about 3 months there will be a partially used 68 3000 flatline for sale in these forums
                  Black Warp Left E-mag #EM00163
                  emagnum board
                  14in freak
                  12v smoke warp w/ interlink
                  drilled 12v revy w/ JMJ impeller and WAS turbo rev board
                  shocktech drop
                  AGD flatline dovetail adaptor
                  68 3000 flatline

                  ***soon to be***
                  emagnum body rail
                  black powder coat
                  custom grips from Frymarker

                  Comment

                  • RT_Luver
                    Co-Official AO Penguin
                    • Jan 2002
                    • 1827

                    #10
                    lol, I just can't remember everything i want to say at the same time. ok the LAST thing i THINK i'm gunna say right now is that I'm a front player and get the flag most the time so actually my team mates sometimes shoot more then I do, and sometimes I shoot more then they do. i guess it just depends on the game status and all. all I ot o say is that A LOT of paint is gunna be flyin at my field once I get this, rather I have someone in my sites or not
                    Black Warp Left E-mag #EM00163
                    emagnum board
                    14in freak
                    12v smoke warp w/ interlink
                    drilled 12v revy w/ JMJ impeller and WAS turbo rev board
                    shocktech drop
                    AGD flatline dovetail adaptor
                    68 3000 flatline

                    ***soon to be***
                    emagnum body rail
                    black powder coat
                    custom grips from Frymarker

                    Comment

                    • paintbattler
                      Mags > Cockers
                      • Nov 2001
                      • 2754

                      #11
                      get the first one...
                      Someone took away my cool sig. *cough*mod*cough*

                      Comment

                      Working...