Emag won't fire down....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Steve Crush
    Registered User
    • Apr 2002
    • 140
    #1

    Emag won't fire down....

    I know this has been mentioned b4 but to be honest... i'm to lazy to look for it. Ok turn the 68cu/4500 flatline off, shoot it down, maybe 40 sec later i can pull the trigger and get a couple shots out of it. How do i keep it from doin this?


    steve
    Tags: None
    • govnamac
      I am watching you!
      • May 2001
      • 965
      #2
      put it in manual and fire it a few times after you turn the tank off. usually works for me without a problem.

        Comment

        • Steve Crush
          Registered User
          • Apr 2002
          • 140
          #3
          did that

            Comment

            • RT_Luver
              Co-Official AO Penguin
              • Jan 2002
              • 1827
              #4
              shoot it more
              Black Warp Left E-mag #EM00163
              emagnum board
              14in freak
              12v smoke warp w/ interlink
              drilled 12v revy w/ JMJ impeller and WAS turbo rev board
              shocktech drop
              AGD flatline dovetail adaptor
              68 3000 flatline

              ***soon to be***
              emagnum body rail
              black powder coat
              custom grips from Frymarker

                Comment

                • spazzed
                  AOChamp
                  • Jun 2001
                  • 4461
                  #5
                  "Shoot it more"

                  lol!! Now if that isn't the answer to end all answers, I don't know what is!
                  I'm way too old for this ****.

                    Comment

                    • BlackVCG
                      Grubby Owner

                      • Oct 2000
                      • 4956
                      #6
                      If you're able to shoot out all of the air after turning it off and then come back and be able to get more shots out of it, your tank is most likely not sealing in the off position, so it lets air back into the valve slowly enough to pressurize it so you can get those couple more shots off after you wait for awhile. Take the tank hose and stick it in some water with the on/off in the off position. If you see any bubbles coming out the end, the on/off isn't sealing. This is assuming that I've understood your problem correctly.
                      My Feedback

                        Comment

                        Previous template Next
                        Working...