holy macaroni, I decided to unlimit my E-mag's ROF for the sake of experimentation, and every once in a while I would get "pkaaaaah" sound. Well, I purposely stuck a ball halfway in the chamber and fired, and my bolt actually PINCHED the paintball. Repeating this about 10 times, half of the balls pinched and were held in place by the bolt (the bolt hadn't come forward far enough to release air, so I had to push the ball into the chamber before the bolt could go forward and complete the cycle). Three of the balls were cut on the side, but the balls were still semi-intact. The other two were shredded as a normal chop. My e-mag was chronoed in the high 270's, and I had a decent paint/barrel match. I am using a longnose AGD bolt with rounded edge.
If a stock E-mag can do this, I'm going to get my hands on a level 10 kit ASAP!
If a stock E-mag can do this, I'm going to get my hands on a level 10 kit ASAP!
Comment