Quick Warp Feed Question

[AllAmericanMag]

Hey, do the AGD Warps come with the proper adapters for vertical feed guns like a Shocker? Or would it be worth waiting for the Proteams to get back in stock?

Thanks.

[FrAuStY]

I bought mine from Modifiedpaintball.com Cheapest place anywhere! 106.99 for a smoke warp and yes it came with both feed plugs.. and the 90* adapter. You may have to modify it for your feed..it all depends. Check em out, Donggie and Butterfingers over there ROCK!

[AllAmericanMag]

Awesome, Thanks!

[Croix71]

I agree with Frausty, talk to Don. Awhile back the AGD Warps didn't come with a 90-degree because of manufacturing difficulties. They did however, come w/ a coupon for a free one when they became available again. Recently AGD has started to redeem the coupans.

[RT_Luver]

they now come with the 90* adapter and it'll work with the vert feed

[BlackVCG]

The AGD Warp will NOT come with an adapter to replace your vertical feed cup on your Shocker. The deal with Smart Parts guns is that a lot of them have pressed in feed necks. These aren't easy to replace like threaded feed necks. What you can do is get the AGD kit, cut off the clamp part on the 90 degree adapter and then shove that in the vertical feed on the gun now. Or you can do what's shown on this page. http://www.robagd.com/shocker/index.html

[Croix71]

Originally posted by BlackVCG
Or you can do what's shown on this page. http://www.robagd.com/shocker/index.html

Interesting... Thanks for the link Black.

[rjvemt1]

before you do that you better look at that tool bench and compare it to yours then ask yourself "is this sort of surgery out of my league or not?"

[AllAmericanMag]

I can just jam this into the feed neck right?

[Croix71]

Originally posted by rjvemt1
before you do that you better look at that tool bench and compare it to yours then ask yourself "is this sort of surgery out of my league or not?"

I think this is the image rj is referring to?

[BlackVCG]

AAM- As long as you cut off the spot where the screw is so that it's completely round around the base, then you can shove it in the vertical feed tube. A dremel with a cut-off saw and some sandpaper make it an easy task. I've actually done it with the saw on a multi-tool and mill file to smooth it out in a pinch one time.

[AllAmericanMag]

Ok, thanks guys.