I got some rit dye the other day and dyed my warp. So i started to take it apart and then realized that i had to cut the wires off the cervo or the board. I couldnt believe that it was the only way that i could get the board and cervo off of the other half of the warp. all in all i cut the wires and then dyed the 2 shells then soldered the wires back on the board.it came out great and recomend it to everyone. I also dyed the two wheels they came out good also. well here are the before and after pics so you can make you own conclusion.
-
-
after -
3Comment
-
4Comment
-
looks nice
Black Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from FrymarkerComment
-
5Comment
-
I
convinced him
helped him
did the sandpaper mod (thanks loadsm5)
and took the pics.good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
yeah speedballbanks help in the most minute way
Comment
-
3 things.
1. Sandpaper mod?!
2. Get a plastic diverter plate.
3. The blue looks real nice. Did you just use blue RIT dye?
Comment
-
sandpaper mod hold's the hopper super tight loadsm5 was the first i saw do it.good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
Hrm... How does this work, and how is it better than a feed neck spacer?
Edit- Fixed typoLast edited by Potatoboy; 05-31-2002, 10:53 PM.Comment
-
well put it this way...the hopper takes abuot 10 pounds of pressure to move and even at that it is hard to move!good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
Wow, that looks fantastic! I'm going to be doing the same mod here in a few days, any tips you could give me?I'm nothing more than text to you...
Attention
Getting
DeviceComment
-
funny, i've had my RIT purple dye sitting on my desk beside me for about 4 weeks now. i just haven't had the proper motivation to go do it. now that i see it's potential i'll definitely reconsider doing it this weekend. But you're gonna have to tell me if that would really look good on my set up. Here, take a peek. Remember, purple dye."To serve to strive and not to yield"
--------------------------------------
I AM THE PURPLE PEOPLE EATER!Comment
Comment