Disconnecting macroline

[Coaster]

I was wondering how i go about disconnecting the macroline from the automag valve. Here is a link to the exact gun i have: http://store6.yimg.com/I/actionvillage_1688_13169647

[LawFox32]

ok on the macro elbow fitting there is that ring thing that looks like its the first thing to touch the macroline; well you push that into the fitting and then your pull the macroline straight out, but you shouldn't do this when the gun is gassed up and oh yeah nice mag

[Coaster]

thanks for the quick reply!

[LawFox32]

no problem

[Hacker240]

my mag leaks at the fitting where i push my macro in. DO i need new elbow, or line or what?

[xmetal2001]

Could be the fitting or the line. Most likely the line though. If you have enough slack in the line you can try to cut off the end so it'll reseal. Or you could get a new line, they aren't expensive.

What i do is wrap it in teflon tape but i always get weird looks so there must be something wrong with that.

[LawFox32]

yeah try getting a longer peice of macroline first and then if it still leaks try to get a new fitting and try that; wrapping the macroline in teflon tape is something i have never heard of

[ZSigErik]

My mag did the same thing, I have the same package. all I do is put a little Hopp's 9 gun oil around the tip of the macroline.

It seals it up just fine, try that and lemme know what happens...