Just one, - Can I run a shocker off of my high pressure max flow if I put a secondary reg in-between the tank and gun?
-
Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...
See ya in the dead box! -
up...Nobody knows???Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...
See ya in the dead box! -
Yes this is posssible but i believe the secondary reg needs to be a low pressure max flo.AGG!Comment
-
Im pretty sure you dont even need a secondary reg, the high pressure max flo should go low enough, someone at my local tourny scene does this and it works fine.Comment
-
If it can go under 250 you are fine, otherwise you will have problems.Quote of the year: "Reading blwos"
As little as 10 cents a day and you can buy my family out of slavery... Hurry before its too late!
Comment
-
The max-flo I have has 2 springs, a high pressure spring, which will work from 600-900, and a mid-pressure spring which is 300-600, and no I can't put a low pressure spring into it because the reg is a totally different size for the spring inside.
I ask because I was looking into buying either a new or used shocker, or a new Intimidator. Working on a slight budget, like 600, so I found new timmy's were 588, and new shockers were 529.Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...
See ya in the dead box!Comment
Comment