KAPP KXS Autococker - $479

[XspyX]

Check this out. Seems like a damn fine deal to me.

Specs:

• KAPP 3-Way
• KAPP Rhino Reg
• Clippard Ram
• KAPP S/S 4 Port Screw
• KAPP K2 S/S Trigger Plate
• KAPP Spring Kit
• Benchmark 45 Frame
• KAPP Sear Plate,
• KAPP Pro Series Valve,
• KAPP Hammer Kit
• KAPP S/S Jam Nut
• KAPP Reverse P-cocking Block
• WGP Venturi Bolt, KAPP S/S 4 Ball Push Pin
• KAPP Universal Beaver Tail
• Benchmark Wrap Around Grips
• KAPP Pro Series Actuating Rod and Collar
• KAPP Jewel
• KAPP Pro Series Cocking Rod

I'm gonna pick one up myself pretty soon. Only drawback is standard feed, but I've been using side feed forever.

What ya think?

[magman007]

hey, that is pretty nice, then you could go out and pick up a spanky cobra body (looks nicer in my opinion) and use that! the white one is pretty cool, you dont see that color to much

[cphilip]

I dunno nice price but isn't the GX 3 only like $100 or so more and you get a bit more with it? Like barrel and removable center feed? And a few things a more...Might be wrong on that but compair those two real close first. And then see what an STO would run ya as well.

[nutz]

phil is right, with a barrel and reg that will run up in the price range of the STO, GX3 or Blackmagic cocker

[cphilip]

Well an STO is $589 and a GX3 is like $559 in a fade anno or so..outa those I think I would maybe go the STO but ANS makes some good stuff too.

[dansim]

its right feed i hate elbows and the last on ei belive is silver they dont have white anno

[magman007]

BAH! you kno what i mean! the picture makes it look white! geez!

[RaV3n_Pa1ntba||]

If your going to buy a cocker, from GX3 to DYE to BLACKMAGIC...buy them here: http://www.bcbg-paintball.com/cockers.htm

best prices on cockers, ever...

[InfinatyBPS]

Spend the extra $75 and get a Gen X3 it comes with better pneus, better milling, better grip frame, vert feed, and for the most part better internals. For not much more, trust me the genx3 will be a much better deal,

[XspyX]

I've always heard KAPP makes more quality products than ANS. Such as pheuns, internals and such. Agreed, the quickfire frame is much better than a benchmark, imo. That I have tried myself. I don't like vertical feed too much, I have always used r/f feed cockers so that doesn't count!

[nutz]

the STO 3way is really smooth. my friend has one and his slide frame trigger is really really nice. Its better than if he puts his slid on my other friends freeflow

[RT_Luver]

well ya know.....thats just dagarn spiffy

[mykroft]

ANS Parts are bottom of the barrel stuff, the stock parts are better. KAPP Parts on the other hand are about as good as STO, and the KAPP internals are better than STO. The only part on the gun which sucks is the clippard ram, which tends to have more sticktion than an STO part. So I'd say this certainly is a better deal than the GX3, given the much better internals, better LPR, better 3-Way, and better 45 frame, even if it's not a vert feed marker. Add a good reg, and a decent barrel will run you the price difference though.

[XspyX]

Thing is, for me anyway, I could just run 300 or so psi in directly from my flatline, so I could just save like $70 on the inline reg and get a gas-thru instead.