*BOTTOM JAW ON FLOOR* GULP... did I see what I think I saw? I Actually did this when I first got my mag to see how forceful it was.. and it bent the rolled dollar exactly where the bolt went. I see this.. and I'm like WOW! This would be great if only I chopped paint. I don't have problems so it will be likely to wait. Nice work though :)
-
-
aright..... sorry to burst your bubbles but IMO this isnt a big deal? maybe in a mag it is? my friend owns a black magic and we set the front reg to where it would normally be and we folded a dolar bill JUST LIKE the video and put it in the feed tube and shot more then just 2 times. NOTHING HAPPENED TO THE BILL! then i got home and went to my freeflow, set the pressure. then put the dolar bill in and folded it the vertical way so it only overlapped once and we shot it multiple times and nothing happpened. we also then tried the vertical fold way on the black magic and it was fine. this really isnt a big deal if it doesnt tear apart a dollar bill. but eh, thats just me. and once i get my camera on my compouter working and my cable goes back up. ill post a video if you would like.-_-_-_-_-_-_-_-_-_-_-_-_-_-
I'm sexxy and so is my gunComment
-
Please do, i would like to see a video of your cockers bolt bouncing off the dollar bill roll without denting it.
PS- The point wasnt that it didnt tear the bill up, it was the the mere resistance of the roll being there made the bolt bounce back and barely moved the bill at all. A freeflow cocker at 35psi ram pressure would still displace a rolled up dollar bill.Last edited by Kaiser Bob; 06-14-2002, 03:09 PM.Quote of the year: "Reading blwos"
As little as 10 cents a day and you can buy my family out of slavery... Hurry before its too late!
Comment
-
YOU SIR are completely out of control and are about to get a ban on you! Thak kind of language is not tolerated here. ONE AND ONLY WARNING TO YOU. cphilipLast edited by cphilip; 06-14-2002, 06:04 PM.Comment
-
It would appear that while Rob was moving the MPEG to his webspace it was corrupted.
The Divx Version should work fine, I just tested it.
If you need the MPEG version and cannot wait for it to be repaired, send me a PM with your email address and I'll email it to you.
Comment
-
*blink blink blink*
Holy.....
And here I was considering getting a cocker.....
I see the light!! I know know the truth. I'll promise, I shall never sway from AGD ever again!!!
Me definately getting Mag ASAP!~The Wanderer~Comment
-
??
ok i have been confused with the entire lvl __? with any kind of mag (lol i prolly sound like a newb) but anyway would that lvl 10 upgrade be available for my minimag? and can someone help me out with the whole lvl thing? and o yeah that video is freakin sick! gj tom! u rule!Last edited by canibus; 06-14-2002, 03:43 PM.Chromed Y-MagComment
-
Maghappy: I admit other markers could probably do this(ive never seen it before) but the point is that its an easy on paint mag that doesnt chop and can still shoot 20bps+. I know no other marker(especially a cocker with the reg pressure that low) that can hold any rate of fire like that with the same non chop benefits.-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 FlatlineComment
-
got it to work... im sold and so are two other people who live near me who have mags
sigpicComment
-
Okay everyone.. sorry, but I never even saw Shartley's posts (which you all are responding to) at all, and really, reading everyones responses to his posts gives me only clues and half-truths in terms of what the hell he said.
So yeah, could you repost what he said or just drop the subject?
Cuz it's really cluttering up this topic
***************************************
To do is to be. -Descartes
To be is to do. -Voltaire
Do be do be do. -Frank SinatraComment
-
basicly he said he didnt understand why tom would post a video demonstration of a paintball gun mod that wont even shoot paintball.Comment
-
guys.... lets get something crystal clear.
The automag in that video, can not shoot a paintball at that bolt setting.
I doubt those cockers that cant squish a rolled dollar bill can't shoot a paintball either.
Honda NSX 2.0 - No Rival ExistsComment
-
lets see a cocker do that i can't wait for lvl 10 to go into production
We are all like raindrops falling from the sky, eventually landing on this sandy star and drying up from the heat of the sun. Even if protected by a huge umbrella, we never know what tomorrow may bring. Someday we will be blown by the wind and absorbed into the sandy earth. -TrigunComment
-
Actually it will shoot a ball just fine, it just wont push it past the ball detent :)
Remove the detent and it works just fine. That video is to show what is possiable with the differnt settings that you can use.
Quit trying to think around Tom's design. People piss and moan about everything before they even know what the hell is going on.
Shartly jumped on something trying to show that someone is trying to "fool" people about what the product will do. I would really like to know why the hell people seem to think that Tom or AGD is trying to "trick" people. He has to be one of the most open people in the indrustry when it comes to what he is working on, what he thinks of the faults of his products are and what he plans to do about it. For christ sake get the hell off his back.
-RobertServing AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.
MCB Feedback +35 --+-- Automags.Org Feedback +25 --+-- PBNation Feedback +24Comment
-
Best possible answer to everyone's fears: wait.
If level 10 sucks you lose nothing by waiting. Like many people have brought up, not everyone is chopping every other ball. An extra month without lvl10 isn't going to determine the rest of your paintball life.Comment
Comment