I havent seen a pics thread in a while so I thought I'd start one. And I have a queastion, on the mini is there supposed to be a hole to screw a vert adapt into? cuz as you can see there isnt.
-
there should be a hole there. I know the rail I ordered from AGD came with the hole there, but not fully cut. Now why the heck would AGD not just make them all with the holes cut out?You are the Wormtongue of AO.~bofh
-
There is a small indent where a hole would be. is this what it looked like? (pic on next post)Last edited by Evil Emperor; 06-25-2002, 07:23 AM.Comment
-
-
yea your supposed to punch it outComment
-
Take the body rail off of the body and flip it over. There will be a big indention where the vert adapter goes. I used a drill to make the indention go all the way through, but its so thin you can do anything.Centerflag Hyperflow 201 For Sale!
Good Traders: I <3 MAGS, Daroach, lovejtwo83, GlowinLCD, Kegaro, jodocastComment
-
in the gun rail, at the front, there is a place where it dips down into a circle. this is so you can tap it out with mostly anything that is that size, and you dont have a big hole there if you dont have a for-grip.Black Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from FrymarkerComment
Comment