My new toy: An Emag Xtreme C&C

[manike]

Originally posted by liigod
I AGREE! springs are needed

Wouldn't be that hard for someone to customise their own gun to do this... might not look so good, but definitely possible...

manike

[darklord]

Beautiful.... but what's with the barrel? Looks like a J&J, but it's LONG as heck.... is that a nickel low-rise feed I see next to the gun? I'd love to see that thing with a warp feed attached. Gotta love that special side feed for warps!

[manike]

Originally posted by darklord
Beautiful.... but what's with the barrel? Looks like a J&J, but it's LONG as heck....

It is a J&J... it was for a mag (hence the o-ring you can see) but was put on a lathe and cut for cocker threads.

Originally posted by darklord
is that a nickel low-rise feed I see next to the gun?

Nope

Originally posted by darklord
I'd love to see that thing with a warp feed attached. Gotta love that special side feed for warps!

I'm sure in the next batch from the anodisers there will be some set up with warps.

manike

[Pand0ra]

Heee it's not funny, you've got pics of my gun I don't have .
Pics should be ready tomorrow. I've installed the warp feed on it, and it rocks.

Btw for the poeples going to Toulouse, I'll be playing with it. So if you want to have a closer look, or even try it at the chrono station, try to find me

Manike, I would like to engrave the battery with your signature, with a little sentence saying it was the first one. It would be a lot better than just put it on a sheet of paper hehe. What do you think about it?

@++

[manike]

Originally posted by Pand0ra
Manike, I would like to engrave the battery with your signature, with a little sentence saying it was the first one. It would be a lot better than just put it on a sheet of paper hehe. What do you think about it?

You're kidding right?! I wouldn't want to marr that lovely finish.

We could always mill my signature into it, but the last time I did that (for BMW design and concept) I got in trouble for showing off! anyway there is more than just me involved in the C&C.

John and Jackie from AGDE and John Bonich are all people who have been a major part in this. Probably way more so than me. I just designed the milling and wrote the NC code. John Bonich designed the extreme Body and John and Jackie Sosta had the foresight to do this and to invest in the machinery.

For my part a beer will suffice I really can't wait to see it in action in Toulouse, and to put a few balls over the chrono range. Where are you staying? I'm at the holiday Inn...

manike

[Pand0ra]

Yes you're right, I could scratch the finish.
In fact I wonder if I should play with my marker. You never know what could happend with all those paintballs flying around hehe . hehe

I'm staying in the Paxotel (because it's nice, and we get very big drinks for almost nothing ).

@++

[shartley]

[manike]

Originally posted by shartley

I'm actually working on a body one of which will fit to a manual gun... I was thinking of doing it thusly...

Manual gun with C&C body set and C&C grip frame (but with no electronics) and with an adaptor that goes in place of the battery pack allowing you to add a front grip, (would look very much like your picture...) or you could just have an empty battery pack.

Thus you would have a beautiful manual gun... and then could very easily just upgrade to an e-mag by adding in all necessary gubbins and electrickery...

Wouldn't be cheap but would be a stunning manual gun which would work just like an e-mag in manual... but be lighter and upgradeable...

manike

p.s. You can fit an extreme and z-grip or intelliframe together if you would rather...

[shartley]

[manike]

The intelliframe should fit directly onto the C&C body. I'm not sure what you meant about the RT pro body being used...?

The foregrip as it currently will not but the bottom section would and would require an adaptor or modification being made. It would not be hard to mill a hole and recess though to allow a normal type screw to come through the body at the front and hold a foregrip.

[shartley]

Originally posted by manike
The intelliframe should fit directly onto the C&C body. I'm not sure what you meant about the RT pro body being used...?

HeeHee... I meant the IntelliFrame.. I went and corrected that directly after posting it. (Thought to myself.... "Gee, that is not what I meant to say at all. LOL")

[Pand0ra]

Here we go: a bunch of new pics of my C&C with the warpfeed installed.
It weights 4320gr btw (the marker weights around 1400grs, but should be lighter with the grip fully milled like it comes on the new C&C Extreme).

[Pand0ra]

Another one

[Pand0ra]

next one

[Pand0ra]

Close up on the right side