CP On/Off ASA question

[ronron2112]

I just picked up a CP on/off ASA.. and well, i have no clue how to attatch it to my CP drop forward. I can slide it on, but theres nothing keeping it inplace. how do i keep attatch it?

edit: oh yea, the ASA has no holes for screws either.

[magman007]

does the drop have 2 holes in the top of it? if so you send the set screws down and voilla!

[ronron2112]

it only has one.. but im not sure if that would work bause it can just slide out

[govnamac]

On the top, towards the front of the drop there should be a small hole. There is a small screw in there that, when turned with the asa on, hold it in place.

[govnamac]

If this is the drop you have, here is the hole.

[Army]

It's a small Allen set-screw. If your drop does not have it, return to the Pball store you bought it from and make sure you get one from them. The drop should already have two set-screws from the factory.

[ronron2112]

I'll try that, with a lil bit of double sided tape just to keep it snug.