serious lvl 10 fomie question

[slushee]

I know there are MANY posts about the lvl 10, but i do need a quick answer.

The fomie on my lvl 10 didnt last more then one shot before being shot off the end of my bolt. The kit came with another one, what do I use to glue it to the end of my bolt

[synreal]

use superglue to reattach the foamie

[virus]

though you can use it with out the fomie.... i put a case and a hlaf though my mag before i noticed it was missing....

[Muzikman]

I would not use Super Glue,
I would use a two part epoxy and make sure you scar the area on the bolt that the foamie sits on.

[Chupas2]

I don't use the fomie. But he's how to do it. Ruff up the surface on the bolt before you glue it. It'll hold better. try a file or something like that and make grooves in it. Super glue should work. Hope this helps

[slushee]

thanks guyz .. i'll try it w/o the foamie (i'm lazy ) and if i get around to it, i'll ruff it up and try the superglue .. or the epoxy .. hmm .. one or the other should work anyhow

[S14-Racer]

What I do is remove all the old adhiesive from the bolt and score it up nice. Then I take either acetone or a high percentage Isopropyl alcohol and clean the side of the foamie I am going to be gluing down, to remove oils and such that would lessen the bond. Make sure if you do use super glue to cover the entire face of the foamie or bolt. If you do it right it generally shouldnt come off for a long time.

[RT_Luver]

get some epoxy or go to wal-mart and get some Shoe Goo(<--stuff works WONDERS)