How to oil mag?

[PB199]

I was wondering how i should oil my mag. It is a automag classic, and i have macro line on it? Thanks

[excessenemy]

pop off the fitting closest to the valve and put 4-5 drops of oil in there. take off the barrel and dry fire bout 50 times. thats it.

[Miscue]

You don't need that much oil... 2-3 drops is fine.

[Jezus]

hmm

I put 2-3 drops of Autolube in my asa and dryfire my emag 10 times without the barrel so there is no junk build up... all the orings get lubed and it seems to work... i suggest doing it this way.

[PB199]

What about on the bottom of the whole valve assembley, there are these 2 holes, and it says oil with a line to them?(I have a stock automag classic valve) Thanks

[Paintballer86]

Paul, I explaned this to you allready in that e-mail! Just ignore the holes marked oil, just put it in the makro line fitting, and dry fire w/ barrel off.

[Jonno06]

i never noticed any holes marked oil

oh well....i just pop 5 drops in my quik disconnect and dry fire without my barrel...but i also have SS hose..