I've got a question. How do you people have your hoses set up? I don't mean do you have a steel hose or a macroline, or whatnot. What I mean is, how is it positioned? Is yours "valve-->gas-trhu-->tank"? Is it "Valve-->loop in front of the grip-->tank"? Or whatever. If you have a pic, show me. I'm just wondering.
-
Good traders: CaPoEiRa, KamikazeChiKenz, bundy09, Tunaman, MajorDamage, hardr0ck68
-
macro line going from ASA on drop to gun... all 12 inches of macro line. looking to possibly replace it with stainless steel but i donno
Last edited by HoppysMag; 07-23-2002, 09:14 AM."You have not converted a man because you have silenced him." -John Morley
-
SS looped forward from bottom line up and over to valve. Actually have a look at the official mags pic thread for good shots. I have pulled the vert asa and gas through since this was taken.
It's great, I can shoot a case of paint and barely touch the charge on it.Last edited by kevdupuis; 07-23-2002, 09:43 AM.Flying the unfriendly skies.Comment
-
hey kevdupuis
arnt 9.6 volt Rc battery awsome, i have one powering my hopper lol..."You have not converted a man because you have silenced him." -John Morley
Comment
-
ss hose from pmi prefect drop,into ACI gas thru forgrip,then to a quik disconnect,then a slide check,then into the valve.......
Comment
-
i got a minimag so I have a SS hose goin from the valve to a vertical adapter, then expansion chamber, then a SS hose from X chamber to a drop
Comment
-
From the tank back to a pro connect to the valve.Comment
-
My air's the same as kevdupuis's setup. I have some white (only size that'd fit) heat shrink wrap over it so it doesn't scratch my gun though.Comment
-
nice sock you got there p8ntballaComment
-
Bottomline to X-Chamber, Gas-thru to valve with QD nipple on valve.2k2 VF Cocker, STO/Eclipse Blade, Old-Style 14" Boomstick,
68AutoMag Classic Feed CF11023, Ring trigger.Comment
-
Thanks, i spent my tank cover money at Hooters.Originally posted by FutureMagOwner
nice sock you got there p8ntballaComment
-
from the tank ASA on the drop to the valve via black marco and 2 90 degree fittings.-Vegeta
View my DevArt gallery HereComment
-
Valve>QD>X-Chamber>ASA/TankClassic RT - RT02667
Blade IntelliFrame
Dye Ultralight
http://TheHybrid.net/Comment
-
tank, loop, valve. cant have a gas thorugh on an e-magBlack Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from FrymarkerComment
-
like that but w/o a emagOriginally posted by RT_Luver
tank, loop, valve. cant have a gas thorugh on an e-magSomeone took away my cool sig. *cough*mod*cough*Comment
Comment