Extreme C&C E-Mag Body

[BetaMax]

Here is a question for you Extreme C&C experts. I currently have an E-Mag Micro 2000. I saw on AGD-E site that there are upgrade bodies for the new C&C-E bodies.. Will this upgrade work on an E-Mag Micro 2000 since most of the modifications was done in the body?

http://www.fox4paintball.com/img/Apr...p/IM000053.JPG

-Brent

[SlipknotX556]

The micro emag body is made by PTP, is smaller then a regular emags body. The extreme upgrade will fit regular emags, but I dont know about micro emags, you will have to wait and see.

[a_defect]

It should. I believe that the bodies are all interchangeable.

[BetaMax]

I am thinking it will. Reason saying is that the E-Mag Micro has a spacer that you put between the body and the trigger frame to account for the size difference. Just wanted to check here to see if anyone knew for sure..

[mykroft]

As the micro uses a stock frame & battery, it should fit just fine, expect to change the on/off pin though, & possible the sear (Not sure if the Micro uses the RT Pro sear pin, or a custom sear with a standard sear pin.)