I'm Freakin out over this new gun...

[M-a-s-sDriver]

Check this one out...
http://www.sacpaintball.com/cgi-bin/...num=1017969608

Also, this board, www.sacpaintball.com , is the best local board I know...spend some time there, and look for me and Ace-PFB.
Brent Jackson.

[freek133]

Kinda hard to really get tight with that gun, the back of the revvy's battery pack section would be hitting your lens.

[Cliffio]

can someone post some pics?
i cant see em

Cliff

[FooTemps]

I can't see the pics either

[personman]

here ya go

.

[personman]

again

[FooTemps]

Hmmm... I usually don't care how my gun looks but i've got to call that fugly....

[Cliffio]

ok what the hell is that

[halo13]

This thing has been at pbnation for a while now. The makers are actually adding to the thread regularly. Its under the custom guns thread

http://www.pbnation.com/showthread.php?s=&threadid=69037

[Sinnet]

i dont get it... is there any point to that nasty alien head block of metal?

[halo13]

those are old pictures. Here are some more recent ones.

[halo13]

go to the link that i posted about pbnation for more info!!

[halo13]

Here is some "technical" stuff:

What the creator's friend says about the gun
As mentioned in the starting post of this subject the gun does use a door like an epic, but the design is much different. Their is an offset loading system that feeds the balls in then air shoots them. So a couple of you are correct when you say their couldn't be a bolt, but if you think it won't work well your mistaken.

What the creator says:
As far as specs go we haven't shot a lot of paint through the prototype and as soon as we got it running we made a significant change, so we went on to the next marker.
However we did set it on automatic at twelve balls a second and went through a couple of hoppers. Rate of fire is not a problem. Very fast very consistant and amazingly accurate.
So far as pressure goes I think the best brssure is between 300 and 350. Automag has their controlled release so they run at a higher pressure, but we're designing for the lower 300 range. Additionally, we are running very large airways and valve system so those that worship at the alter of low pressure can crank the dwell up and turn down the pressure.
Someone mentioned "like the Epic" yes we have a door "sliding hatch cover" and Epic has a door "Trapdoor" But the automag has a bolt and an autococker has a bolt and they are not alike. Alien and Epic are not alike.
The pictured version is nearly complete and we hope to be out at Telfords in Modesto Saturday the 20th up and shooting.

more stuff:
Ram Valve
dual hammer - 1 door 1 valve
Air Flow = Radius squred * Air flow
Cocker and Angel use 1/4 but Alien is going to use 1/3
= 70% higher flow past valve
Designed as Electro Pneumatic - fully electronic - no sear
Guns that use Humphreys solenoid: Shocker, Impulse, Bushmaster, Intimidator, Ect..
Can Operate as a blow back and sold for lot less $ as a blow back with sear with or with out electronic trigger
Guns that use SMC solenoid: Angel, Matrix
At first the Alien was only Tournament Electric
Homemade-
Duane Parsons - who did all prototype & developments & most of the machining for Twisted Paintball Products - ( www.twistedpb.com ) taken over & doing final body (not shown) and 1st run of Alien Markers
1st Run of Markers -100-
Alien Jack Expects to show them in Chicago - June
Picture of 1st run marker will be on by then
Hears a pic of that ram-valve combo

Again, a link to the pbnation thread.

http://www.pbnation.com/showthread.php?s=&threadid=69037&perpage=21&pagenumber=1

[puckmaster]

Hmmm... I usually don't care how my gun looks but i've got to call that fugly....

Amen Brother

[FooTemps]

OK, that guy needs some lessons in artistic design. Maybe if he made the gun look good...