Ok a few questions about Level 10

[LawFox32]

Ok I have my LX installed on my mag and I have to things I need conferenced.

The bolt still isn't that soft it kinda hurts when it hits my finger, how can I soften it?

When I am shooting about half the time the bolt doesn't go anywhere and just go right to the air vent like when it is stopped on a ball and it does it half of the time, when I am shooting over like 2 bps

ok those are my only problems, I had a lot of fun putting it together and all

thanx

[netjunk1e]

What srping are you using, what carrier and how many shims?

Are you using a clasic vaulve? And what velosity is it shooting?

[Havoc_online]

the longer spring you use, the softer it will be on paint. you must turn up your velocity till it fires reliably

[LawFox32]

Havoc thanx you pretty much answer my question I just shot some paint with the short(original spring) and it actually broke some paint, so I am gonna use the long spring

[Havoc_online]

glad to help, I'd recommend using the cut spring, it will still be very soft on paint and/or your finger

[BlackVCG]

If the bolt is only moving half of the way forward, then you need to make sure that your input pressure is above 800psi and turn up your velocity a bit more.