Getting Mag Need Help

[confedman75]

heres the qeustions and im not a newb and i want to get a mag.

whats all the upgrades for a mag?(note say barrel instead of boomstick or freak)

whats the advantages and disadvantages of mag and cocker?

what gun should i get for 800$?

will co2 screw it over?

whats lighter mag or cocker?

[BajaBoy]

uh mag and cocker both are good its what u like more.. closed bolt or open.. most upgrades that are worth it are made by agd them selves. All the other crap does nothing, besides barrels. um for 700 get an rtp and nice hpa tank. Yes co2 will mess over all rts, emags.. it works on a classic.. not very good though

[confedman75]

any one else?

any one else?

[Testarosa]

I would suggest a AGD Minimag (black).

the upgrades I would get would be:
1. Level 10 Bolt-85.00
2. Intellifeed-100.00/120.00
3. Warp Feed
4. RT valve-200.00/225.00
5. With the barrel I would buy either a smart parts Freak or a DYE Boomstik (12 inches both types)

hope this helps

[confedman75]

im a newb to mags theres three types right? the emag, rt, and minimag right? can the mini mag be as good as the emag?

[confedman75]

nitro

as for my nitro do i need high output 800 psi or low output 400 psi? and do i need a secondary reg?

[Testarosa]

To a small number of crazy poeple would say yes.

But just about anybody would say- "Hell No!"

If you are new to mags, stick towards the minimag. I think they look better than a regular mag does. A emag is a great gun and has many cool and handy features, but they are guns that have to be mantained properly. If you don't know a good deal about mags, then there is a chance you could mess something up and have to pay to have it fixed. Then you'd be out of a gun for awhile.

[confedman75]

nitro

what about my nitro question?

[Testarosa]

They say that 850psi is the best for your output pressure to be. As for the regulator, since your tank has a regulator that spits out 850, the one in the gun does a great job. A secondary regulator is most likey to rob your gun of air. It usaly works best with no secondary reg.

[confedman75]

true?

Originally posted by Testarosa
I would suggest a AGD Minimag (black).

the upgrades I would get would be:
1. Level 10 Bolt-85.00
2. Intellifeed-100.00/120.00
3. Warp Feed
4. RT valve-200.00/225.00
5. With the barrel I would buy either a smart parts Freak or a DYE Boomstik (12 inches both types)

hope this helps

can all of those work together at the same time on a right feed minimag?

[confedman75]

can a n2 nipple prtector and thread protector be used at the same time. and are minimag barrels the same as automag barrels? like are they the same threads?

[Testarosa]

Oh sure they can. I know cause my friends gun was the exact setup except for the lvl 10 bolt. He sold it for money to pay for a car.

If your still worried, don't be. Cause all of that stuff is made by AGD. And AGD wouldn't make something that won't work on there own guns.

(Oh yeah, the barrels aren't made by AGD though.)

[Testarosa]

A thread protecter won't work cause the bottle will be screwed into the gun's CA (constant Air) adapter while playing. It can be used when the bottle is taken off the gun and stored indivildly.

And yes, the minimag and automag barrels are the same.

[confedman75]

any one else?

[magman007]

ok, first off, you have to tel us what you want.

do you want to upgrade to get raw performance, or do you want it straight out of the box? this will determine whether i reccoment an e-mag/rt pro, or a minimag

The minimag will come baiscally bone stock, accept for the asa. For the minimag you are going to want to put a retro valve in, and if you put a retro in your going to need hpa, a new triggerframe, maybe soem cosmetics (sight rail and such) your going to need a gassthrough fore grip, probabally a drop of some sort. and if it floats your boat, an aftermarket barrel, allthough, the stock mini barrel is one tough cookie. after all this, you will have a truely competitive mechannical marker.

Now, with an e-mag or rt pro, ou already have the retro installed, you have the sight rail, you have the intelliframe(on rt pro) you dont need a gass through, you will still need a drop, and they already come with one of the finest barrels on the market. THese are the best of the best out there, and they are competitive outta the box.

Also, with the e-mag, you have a good electric trigger. Something you almost need now a days.



Barrels. Boomsticks are ovverrated. I do not understand why they are so reccomended. If you were to buy a barrel, i would reccomend a custom products one piece barrel. THey are cheep, not overly ported which translates into efficiency, accurate, quality, and you can get 2 for the price of one. also remember that the paint to barrel match is what counts. The freak is ovverrated also. THere are better barrel systems out ther, like the j&j edge,the equation usa kit, the cp barrel kit, and so on. All tho i still reccomend varrious single piece cp barrels in varrious bores.


If i were you , and i wanted a mag, i would save for the e-mag. What he said above about an e-mag needing maintinence is bull crap. it needs just as much as the minimag. But dont forget, there are various other markers out there, and you just have to try alot of them, and try them with different set ups too.