Info on max flows

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gadget68
    Registered User
    • Sep 2001
    • 257

    #1

    Info on max flows

    Do the new 2002 regulators that come on the 4500psi Max Flow tanks also come on their 3000psi tanks? Looking at getting one. Also anyone have this tank who is willing to share their expiriance and the kind of set up. (ie: drop fowards and markers).
  • alf
    Owner of the RFH Emag
    • Jun 2001
    • 1141

    #2
    hey gadget...i dont know about the new ones, but i have an 88/45...

    i share the tank between my gz timmy and my emag...i use a northwest paintball products quick disconnect...this is ESSENTIAL if youre going to use it on an emag...because the smart parts drop doesnt go down far enough to take the battery off

    with this system, you have a piece that is permanently attached to each gun, and a smaller piece that attaches to your drop...the pieces mate, and are held together by a push pin...this allows you to VERY quickly move your tank from one marker to another

    as for the GZ, i had to be VERY careful about the length of screws i was using for the attachment of the "grooved piece" (piece that stays attached to the bottom of the marker), because if the screws go in to far, they push the battery up, and causes ALL SORTS of problems.

    getting shot in the reg is a PAIN! lots of little nooks to clean....and it can get dirty fairly easily if you put it in the dirt (like at a tourney waiting to take the field).

    they are VERY easy to adjust, are VERY consistent, and you either like or dislike the look of it...i would recommend not getting lock socks (they move around a little too much), and getting a dye bottle cover...those are pretty nice.

    hope this helps with at least PART of your questions.

    -alf

    Comment

    • gadget68
      Registered User
      • Sep 2001
      • 257

      #3
      Thanks for the info. Do you have a website handy for the quick disconnects that you are talking about? That sounds like what I will want to go with. Do you know much about the KAPP DZII cradle with this tank? Again thanks for all the info.

      Comment

      • pito189
        viking
        • Oct 2001
        • 2093

        #4
        nwpaintballproducts.com That is their website. You can get them from modifiedpaintball.com for 20 bucks I believe.
        Old School Baller
        Have a Viking, still miss my X-Mag

        Comment

        • alf
          Owner of the RFH Emag
          • Jun 2001
          • 1141

          #5
          DZ II...i wasnt successful in mounting it to my maxxy...i just used the stock drop...works out nicely

          save your $$

          -alf

          Comment

          Working...