warp feed and level 10 mod problem

[56kSomeGuy]

I'm not sure if this has been asked yet (since i haven't been on the forms lately)But I have two questions.

1.I just got my level 10 mod in my classic mag and it shoots great but as I tried to use it with my worp feed the vibration was not enough to make the warp feed move. Hos this happend to anyone else? and does anyone know how to fix it?
2.Also I have a small leak comming from the back since i have to turn the the velocity up alot to make the level 10 work. Does anyone know how to fix this?

Also i am using a pre-set 68/3000 nitro tank.
Thanks to who ever can help me.

[Gitaroo Man]

get an intelliframe and intellifeed it to the warp so it feeds every shot

[BajaBoy]

intell feed it?

[LawFox32]

ok I am not sure about the warp you can turn the sensitivity up on the vibration plate or you can intellifeed it

and on the leak, you just need to turn down you velocity alil bit, and if you can't get the velocity you want w/o the leak than you can go to the shorter main spring

[the jackal]

To make the warp work take the black plate off the back and turn the blue knob (sensitivity adjustment)clockwise a little at a time until it works reliably (check the warp instructions for in depth info on fine tuning this adjustment). As for the level 10 I think you need to switch to the next shortest spring but you may want to double check that.

[56kSomeGuy]

Oh forgot about the blue thing that adjusts sensitivity. Ok problem solved Thanks