Don't even ask...

[boomerfoxtrot]

maybe you can help me out then... when I have the Z-Grip on my gun... it does that, but it fires after I let the trigger go, and then it shoots down... short strokes, and then goes full auto again...

I have new seers and springs, o-rings....

do I need a new on/off ?

[Butterfingers]

Make sure the trigger rod isnt touching the back of the trigger. There should be a little bit of space there.

Also check for abnormal sear wear.

[johnny dee]

dont even ask

WOW that is amazing, but i dont think that id want to do that its too much paint, it would be fun as crap to do tho, you are my idol...lol nto really

[Scooter/Cootie]

Originally posted by Butterfingers
...put about 40,000 dryfire & live shots through it already...

That must have been in about 10 seconds!


Does your tank and/or reg freeze up on get any condensation on it since your dumping the air so quickly?

[Butterfingers]

nope it gets cold but thats usually it.

[fearc7]

Whoa!

[KamikazeChiKenz]

Sweet

I've done something similar to that but it was not that awesome. Nice very nice

[Vern1]

Greetings,
We shot some video late yesterday of Morphious(he was the one shooting the GZ Timmi/Halo video on SEMI-auto on PBNation) actually shooting a RT Valved Warp Fed Mag with Level 10 AND PAINT doing the same thing.
With paint, it won't shoot quite as fast, but it is still really cool to watch.
If anybody wants to see it shoot with paint, I will post the video tonight?
It kinda goes ripppppppp, spit(level 10 STOPS on a ball), ripppppp, spit again, rippppppppp.....then the HALO feeding the Warp is empty, then it picks back up to something similar to Butterfingers video when it runs out of paint!
A HALO/warp full of paint eats about 1K from a 47/3000 preset PMI tank shooting that fast with paint - yeah, I was surprised the tank could keep up as well as it did.
We did manage to chop ONE ball out of 5 hoppers full at that rate of fire.
Here is a hint: as long as we kept the MaxFlo we were using before we put the screwin on BELOW about 750 PSI, it worked in semi with a very rare burst - anything above about 800 and it went totally reactive when you found the sweet spot.

[Wheelman]

man that's retarded fast, I want

[Butterfingers]

I have found that unless a 12 volt mod is done on the warp it is a limiting factor. The halo B is actually faster than a 9v warp.

If you want to really see paint fly link it directly to the halo B.

I have achieved that same ROF 21 bps with an average of 2 skips per hopper from the L10.

[Vern1]

Greetings,
We have the 12V mod in the warp - even with the HALO feeding it, with the Level 10, it would still hit a ball and vent on occasion, then go right back to ripping!
Simply amazing for a totally mechanical marker!
Illegal as all get out in a tourney, but amazing, nonetheless!!
My 12 year old son found the sweet spot and emptied a HALO in under 10 seconds.
We will have to try it with just the HALO for grins.

[BTAutoMag]

my god the answer is so easy. you kicked the presure to over max. sure it will give you full auto but it wears out your internals like mad. this uy named chad who lives near me does this to his emag and he kept wearing out the internals so bad he would have to send it in.

[Butterfingers]

Yeah,

I definately agree with you here... Using it in a tourney would get you pulled faster than you could blink.

I have an adjustable tank for it when I play I usually set the input to a snappy 750.

They are definately fun guns to play around with... If you have an old mags laying around you can trade the valve in for an RT valve for $200 and really get a bang for your buck.

[Butterfingers]

the input is only 850

my sear has over 40,000 rds in it its like new...

yes there is a way to do it without damaging somthing

[Butterfingers]

With paint...

I really lost my rythym midstream...

with paint albeit a tad bit slower.

http://www.butters.org/MOV00005.MPG