im installing my level 10 and i gassed it up, it burped twice and then locked up. the trigger is jammed forward and will NOT MOVE i think there is still pressure in the gun how do i vent it? the procedure i took so far: unscrewed powertip, took out oring and spring. then i put in the white oring, and the 1.5 spacer and then the new powertube tip. i was going by the complete install so i dont even have washers in there yet what do i do?
-
mostly he was insaine but he had fleeting moments of mere stupidity -
are you using a screw in? if so take your tank off, also is your saftey on?
Originally posted by Tom in reffrence to a post saying he acted like my dad...
"That's right!
WHO'S YOUR DADDY!!"
ALL QUIT AND NO GO!!! Team Icky Forest-Shatnerball 2003!!!
www.tunamart.com
DONT SUPPORT HYPOCRITICAL MISSLEAD YOUTH, BOYCOTT HK
-
One time this kinda sorta same thing happened to me. It was actually that my grip frame screw was in too far and pinching the sear. (this was a benchy frame on an OLD RT by the way)
if not i have no idea. mags always hold air, but the trigger rod shouldnt be forward.Comment
-
i just wanted to add that...
i heard something about level 10s, as well as rt valves, keeping gas pressure in the system after it stops firering , that would need to be vented off
but it shouldn't jam the bolt
just wanted to add that pressure bit...Comment
-
yea i got it figured out, it was weird i think i had some teflon stuck in somewhere because i had to vent by taking off the macroline fitting. eitherway yes the tank was off the gun, no safety to remove, it was really really really weirdmostly he was insaine but he had fleeting moments of mere stupidityComment
Comment