ok I'm sure that this has been asked before but I couldn't find it. anyways, my problem is that my warpfeed is not slipping by the balls and causing it to missfeed and slowing down my rof. so what can I do about this? thanks for the help. AZZKIKR
-
mess with the best, DIE like the rest.
when it absolutely, positively has to shoot well everytime
http://www.theangelguy.com -
amount of advance
You need to adjust the amount that the warp advance's on each shot.
This is done with the 4 jumpers, take one jumper off and see what happens
Prezents
-
no man the problem is that the wheel is not sliping by the balls on the weel to let the ones by the rev catch up to the rest.mess with the best, DIE like the rest.
when it absolutely, positively has to shoot well everytime
http://www.theangelguy.comComment
-
try breaking a ball and smearing the paint(very little) on both wheels, this will give it the ability to slip past the paint, and should help ur battery life becuase there will be less stress on the motorAO #765
CCM Series 5
Prerelease Impulse
Hyperframed Warped Mag w/flatline tank
Feedback.
Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.Comment
-
-
i used veggie oil...worked alright for me...tom said (somewhere) that after a few uses a natural residue will build up anywayComment
-
how often will I have to do this? is there anything else that I can do?mess with the best, DIE like the rest.
when it absolutely, positively has to shoot well everytime
http://www.theangelguy.comComment
Comment