-
NVE-mag
Certified Airgun Tech.
-
close upNVE-mag
Certified Airgun Tech.
-
hard to bump, eh?NVE-mag
Certified Airgun Tech.
Comment
-
The whole marker
Well I think this is one of the most customized emags out there. I have put a lot of work into it.
SPECS
Micro E-Mag
Level 10
Blade Trigger
shimmed trigger (no slop)
Freak 10 silver/12 black
Flatline 68/4500
REVO
-Warp board in revo
-egg V1 paddle
-powered of emag battery
-spins on trigger pull
Oh yeah Power switch
so what yeah think
Later HillsLast edited by ah137; 09-19-2002, 05:27 PM.NVE-mag
Certified Airgun Tech.
Comment
-
NOW THAT'S COOL!!!
I'm inspired!!
Comment
-
very impressive,Team Exotic Elements
Got Ace?
Comment
-
I had a similar idea as posted in one of the "yellow pin" threads. I instead wanted to use push button type momentary switch. One click on. Another click off. It would be encased with a rubbercover to protect from the elements as well.
I better go switch hunting today or tommorow so I can complete the project. One thing I got to watch out for as Manmike has informed me to make sure the switch I get can handle the electrical flow, as he has had many experiences of the switches burning out.
Also one more thing Ah. That hole in the side of the trigger frame. Was that there originally or was it drilled out by yourself. My Micro-E has the same hole but on the exact opposite side of the gun on the left instead. Either way looks like it turned out nice.
Keep us posted on how long the switch lasts.
-HyperComment
-
Your Micro-emag is SEXY! hehe
I've wanted one like it for awhile now, I've got the non-emag version.
I like what you've done with it!
EM01698 2/3rd's ULE-EMAG, PipeKit, SystemX drop and 88/3k PE.Comment
-
very nice work! I thought of doing that also, but I have an ACE board where your switch is!
kilaKila V2 Magnetic Suspension Detents for Angel 04 Speed, LED, LCD, IR3's, X-mag, ULE Mag, TAC-1, SFL Emag, NYX Matrix, E-blade, Mac Dev Cyborg, Bushmaster 2000, All other Cocker threaded guns, Shocker, Nerve, Impulse
Kila V2 for Alias...the ountdown is on!
Email: [email protected]
www.kilaproducts.com
AO PM: kilaueakidComment
-
All of these switch idea's have been tried by AGD. The problem is the current draw of the solenoid is too much for most switches that will fit..In the extreme CNC's they have a switch turn on a transistor so the switch is not overloaded.
something to think about
Kayle"It's my buddies gun"
"I just bought it"
"It came that way"
"I borrowed it "
I HAVE HEARD THEM ALL, SO BE ORIGINAL !!!
My gun says I'm holding it back from doing great things ...
Comment
-
Cool
SWEET!!!!!!!!!!!Comment
-
GRRRRRRRRRRRRRRRRRRRRRRR
Back to the yellow pin for me...
-Hyper
Micro-E LX w/ a bunch of kewl schtuffComment
-
Take your rail/body off and look, I am sure there is some where else you could put it!Originally posted by kilaueakid
very nice work! I thought of doing that also, but I have an ACE board where your switch is!
kila
would mind seeing a pic of the ace board my self you have any.
HillsNVE-mag
Certified Airgun Tech.
Comment
-
How many amps is that switch rated at? You will probably blow out the switch one of these days.
Comment
-
Probably? yeah, but we will all prabably die at one point too.
If that happens then, flip switch, finish shooting people, fix!!
bummer huh
Thanks for your concern
HillsNVE-mag
Certified Airgun Tech.
Comment
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
The REAL solution the yellow pin!!!
Comment