need help with my new imulse

[zach rumchak]

hey guys i just bought a red vision impulse i love it and is the reg factory set or do i need to set it ... if so how do i see the pressure its at and how do i change it

[paint magnet]

Well, I'm guessing it's factory set. I dont' know how to change it, but if you figure it out, you should NEVER RUN MORE THAN 220 PSI into the gun. The Impulse operates on very low pressure. Usually, stock ones do best at about 180-200. Good luck.

[AcemanPB]

yeah run it around 150-180ish

and i'm guessing your asking how to change the max flow reg.. so you just turn the spring cap clockwise to increase the preasure

[paint magnet]

I guess it's the same for the vert. reg, since you didn't say which one you had. If it's not factory set then always turn it down as low as it can go first and then go up.

[cris8762]

ok.....it is usually factory set, but if you put any internal upgrades on it you should reset it AND your dwell, i recommend that you read your manual completely, and if you still have anymore questions, try the imp fourms on www.pbreview.com

[zach rumchak]

yeah thanx guys i got it set at 190 right now and i really love this gun its great fast and still havent broke paint im gonna play tommorow i hope it proves it seflf well