Go Lower you think?

[pito189]

http://checkitproducts.com/index2.html

I can't verify anything. But they are only 20 bucks. I think LoadSM5, was thinking about trying one with his SFL, get in touch with him and see if it worked out.

[cphilip]

Well these two mods are 20 and 40...Well and the cost of a body to boot.

Will do and sounds interesting though.

[Dragoon]

I know this is not a classified (yet), but what is the targeted cost of one of these bodies?

Douglas

[cphilip]

OK guys brad and his polishing minion have been busy today!

he called this the three little bodies. You will see a stock, then the low mid rise, then the "Almost No Rise" All three of em in this one picture.

You guys think we should take up a collection to get Brad some more manly towels?

Phil

[EnW]

Originally posted by paint magnet
Why not just make one that can accept Angel-threaded feeds?

When I had mine lowered I was wanting the Angel feed tube also,but,Brad explained to me that the Angel's use a unique dye for the threads that he doesn't have. The dye's cost $90 and he couldn't warrant spending that kind of money on one.

jah871...what do you mean my no rise is ugly?
That hurts man....

[BradAGD]

Doing the Angel feed threads is possible, just need a really expensive tap to cut the weirdo threads the gun uses. It's a 21 mm, not 20 or 22 like normal metric people use.

Almost got all of the bodies done, just waiting for another to cool off so I can use the jig for the next one.

Thanks for the compliments on the bodies too, I try.

[cphilip]

Enw... that was cruel of him!

He was just kidding I think it looks great! Different strokes though several liked the low mid rise too.

I liked the lower ones like yours and that bottom one though.

Brads a solding king is he not?

[jah871]

Originally posted by EnW

When I had mine lowered I was wanting the Angel feed tube also,but,Brad explained to me that the Angel's use a unique dye for the threads that he doesn't have. The dye's cost $90 and he couldn't warrant spending that kind of money on one.

jah871...what do you mean my no rise is ugly?
That hurts man....

i like it a lot better than the stock verts but i prefer the look with a little bit of the tube then the bell its all preference!!

[pito189]

Originally posted by EnW
jah871...what do you mean my no rise is ugly?
That hurts man....

Man EnW I think yours is the best looking IMHO. Can I ask you where you got it down and how much it was?

What do you feed that best with...HALO?

[EnW]

HEHE...I'm not THAT soft hearted!
Anyway...when I posted last I answered paint magnet's question and didn't address the topic of the thread.
Undoubtedly I like the "No Rise"....BUT....the "Mid Low Rise" is definitely an improvement!
The no rise definitely needs a HALO on top to get max performance.
My 2 cents

[EnW]

Mine was done by BradAGD also.
I had a thread with all of the info and contact info up earlier in the month.
His phone # is in his sig if you want to talk with him directly. Or got to www.paintballmaxx.com

[scrambler]

nice

ok the bodys look really good, nice job BradAGD. now alittle info, so these bodys your making are to be used with halo or evolutionII for best results? dont have to worry about stacking of balls cause of the way they feed? always thought you had to have some type hole for blow back.
really like this center feed low rise cphilip what will be the finally cost? and will the revy xboard work till save up all the money?

thanks Bill

[cphilip]

OK now here is a black body that was missordered and, even though Brad realy did not want to do it because it would mess the finish and someone is going to have to polish it on out or even think of powder coating, at my insistence he went and did it anyway. So it might be of interest to some of you with black bodies to see how much work you are going to have left to do if you decide to do a black body.

[personman]

Phil I want one!
How much do they cost?! I want one I want one I want one!
Do you think I would have feeding issues with a 12v rev and level 10?

[datapimp69]

i think this is the perfect size. just a little of the neck left.

i dont like the way it looks with the bell right on the body.

i just got mine back from brad.

p.s. this gun is for sale