Now that you Have Intelliframes How About some Feedback!!

[krafty]

Darn right purple is cool! My black frame is pretty black, but it still looks great with my purple minimag body. Just waiting on my new ReTro Valve to round out the Grape Ape. :)

[TylerDurden]

It's awesome! it feels great and with the blade trigger i can fire a lot faster than i use to.WWWWWWWWoooooooooohhhhhhhhooooooooooooo

[Cypres0099]

I got my intelliframe a little while ago and it is sweet. I can keep up a higher rate of fire for a longer period of time than with the stock. It has a really short and light trigger pull. With the stock frame if i tried to fire as fast as i could I would short stroke, with this frame nothing. So far I've put 500 rnds through my gun with it on all at a higher ROF than I usually shoot, so I could see what the frame could actually do. No chops no short strokes no problems.

P.S. If anyone needs to know how to know how to hook up the intellifeed to a pre brass eagle 9V, all you have to do is attach the white wire from the Phono plug to the white wire going into the revvy's board and the plain phono to the blue.

[magmanpaintball]

I just got mine today and i tell yah. DAMN!!! I could shoot prolly shoot faster than an angel with this thing. It is by far the best thing that i have ever shot.

[Dubstar112]

i love it, infact now that i know how much i like it i would buy one even if i didnt own a mag.:)

[Nitroduck]

Great frame.....

One thing : drill a hole in the frame so you can access the grips forward-most frame screw..That'd be the finishing touches.

[magking1971]

I hate double triggers but got the intilli on a trade and put it on my mag to try it out and well, I LOVE IT!!
Works slick as heck, I'm going to keep it.
ben-JD I went and got two earphone sets from radio shack, ($2.19)cut the ear thingies off and the jacks are at a 90 degree angle works great.
The part # is 33-174B hope it helps.

[Shaft]

I had my Intelliframe Groove out for a day.

Looks good. The purplish finish matches my SP Teardrop, so more power to me.

Feels good. The sticky was an excellent choice. The grip is comfy in my big hands.

Works good. I could fire fast controlled bursts with ease. The position of the bottomline holes is more forward which balances my PF Mag with 68cui Flatline better. Nice.

Small gripe -
The hex screws look swell and all, but what oddball aerospace spec hex are those things? Now if I had only taught my cat to fetch my tools.

A gripe you may want to consider -
The main tear down screw would be better recessed. It digs into my hand - gloves help.

Curiosity -
I wonder if the Blade trigger is any better. It'd be cool if it came with both. I may be asking for too much here.

r

[RobAGD]

Well all of the people I have sold them too have been extreamly happy with them.

I have now down 2 links, and I really dont like the 1/8 connectors.

As for the 90* 3/32 they are not very strong, I broke on off my Revy with my mask. :/

I should be getting mine soon for In Shop demo units ( my guns )

I am debating what and how I am going to hook them up to.

-Robert

[ben_JD]

Thanks, Magman and RobAGD for your comments. I assume that any 3/32" male jack won't be very strong, I am just looking for something stronger than the 3/32" straight plug that gave its life for my last weekend.

What I envision is similar to the round 1/4" phone plugs with a flat, round top and a 90-degree bend to the probe. Difficult to paint a picture with words, but the top of this plug is round a flat with the wire coming from the side of the plug. I have seen these on larger phone plugs, but don't recall having seen them on the smaller plugs. It looks tough enough to take a direct hit with little or no real danger of damage.

But, the Intelliframe is great. I don't personally have any problems with the color of the anodizing, but maybe mine was in a different batch than Tunaman's.

[SIGSays]

i notice that when i turn on my rev it still spins after i set up the intellifeed...... then when i puch down on the lever it goes even faster!!!! then when i have my finger in the feed tube and push down on the lever the thing spins just as fast as when i don't have my finger in it..... how many volts does it utilize??
and i got a 12v and it's even more with the whole intellifeed set up

[Gunga]

Re: Clarification

Originally posted by ben_JD
I am now looking for a low-profile 90-degree angled 3/32" male plug that would be able to survive more abuse. Has anyone seen one of these?

Ben_JD,

I'm using a 90* elbow on my Intellifeed/IntelliFrame setup. I've got some pics (and part #'s) of it at: http://www.automags.org/forums/showt...threadid=13542

As for feedback, I've only used my Intelliframe once so far, just as a standard double trigger. Veeeeeeery nice. :) I set up the Intellifeed part of it, but have yet to play with it. THough it works quite nicely during testing in ye olde back yard. :) I think I'll try it out this weekend.