Is an intelli possible here?

[Magluvr]

I was wondering if there was anyway for me to get an intelli for my mini since I have the stabilizer on it. Can I do anything besides chopping up the frame.
(Note: DO NOT say "Get rid of the Stabilizer, I need it since I can't get nitro in my area & have to rely on CO2)
Oh, how much better are the intelliframes over the DYE, cuz the DYE are cheaper!
Here is a pic of my gun:

[spazzed]

In the end, the dye's are almost as much as the intelliframes. (so long as you get one off AO, or a used one). Yes, you can use an I-frame. Wether or not you use CO2 or N2/CA has no bearing on the effectiveness of an I-frame.

Cheapest route for an I-frame would be used, check the classifieds. If you're hell-bent on new, then check w/ tunaman, he'll hook you up ;-) Ain't that right tuna?

I'd Imagine that it'll fit!! Happy sam?

[shartley]

I think he wants to know if it will FIT, not if it is possible with CO2.

[FutureMagOwner]

eh if it does you could get a foregrip extender

[petefol]

if the hose fitting on the stab is right under the single trigger frame then i dont think a 2x frame will fit. thats kind of odd cause on my stabilizer the fitting was off to the side, but maybe there all different.

[dcmander]

I dunno if it would fit because its a VERY tight fit on my micromag. I know you can get an intelli on there cause i've seen tons of micromags with it. I just think you need to put some tension on the trigger guard to get it to fit.

Can any micromag owners confirm this or tell me who to get it to fit?

[yeahthatsme]

your best bet would be a foregrip extender

[Magluvr]

Originally posted by petefol
if the hose fitting on the stab is right under the single trigger frame then i dont think a 2x frame will fit. thats kind of odd cause on my stabilizer the fitting was off to the side, but maybe there all different.

You got it, the hose elbow comes out right beneath the trigger. That is why I was wondering if the intelli would work because it is a double trigger.

So it looks like I would have to get a foregrip extender. Where would I find one of these? And does it go that much farther further so that the intelli would fit.

Is there any other way, because if I got a foregrip extender I would have to buy a longer hose for the other side of the mini (where the quick disconnect is).

OOPS, I guess I was a little off since I would have to buy the frame, trigger, and grips if I went DYE.

[yeahthatsme]

check the classified forum at the near bottom of the main page. mostly in the misc paintball items. ask and you should recieve

[Halliday]

You could drop an tank o-ring into the adapter ASA to change the position of the Stab input hole. Move the hole to a side and you should be back on track.

[battlegroup]

Take your gun apart and turn the vertical ASA adapter around. This should put the elbow on the fron and a 2 finger trigger frame should fit. You may have to get a longer hose but otherwise it should work fine and keep the marker compact.

[Magluvr]

Originally posted by Halliday
You could drop an tank o-ring into the adapter ASA to change the position of the Stab input hole. Move the hole to a side and you should be back on track.

Thanks Halliday, I'll try that. Its a little more convenient than having to buy an extender, esp. since I don't know where to buy one.

Sorry BattleGroup but your idea wouldn't work since the mini has all the hoses on the other side. If I did that I would have to wrap the mini's hose around the frame or body, and then the I would also have to purchase a longer hose to reach from the ASA to stab.

P.S. Thinking about it I think I tried Halliday's idea when I had the stab on my old gun (it was a tricked our Piranha).

[*ArKfEaR*]

or the angled asa by dingo paintball

[TheTramp]

Originally posted by shartley
I think he wants to know if it will FIT, not if it is possible with CO2.

You didn't answer the question! What's happened to you!

An Intelliframe will fit with a Palmer Sab.

[dcmander]

Originally posted by dcmander
I dunno if it would fit because its a VERY tight fit on my micromag. I know you can get an intelli on there cause i've seen tons of micromags with it. I just think you need to put some tension on the trigger guard to get it to fit.

Can any micromag owners confirm this or tell me who to get it to fit?

No one answered my question about the micromag and intelliframe.

It seems as though the frame squeezes in there, with some tension on the foregrip or trigger guard, not sure which.

Is this just the way to do it? Just screw on the back side of the intelliframe and then just squeeze in the front part?