With both the large and middle mainsprings, the Level 10 shoots over 300fps. If I lower the velocity any further beyond the 300fps mark, I am running the risk of the gun not firing if I am not shooting rapid fire. I went to the shortest mainspring, but it does not function as well as it does with the middle mainspring. Is this how the Level 10 is functioning for you?
-
-
My lvl10 is working great. Maybe you need to add/remove a shim or maybe change your carrier. Experiment with it a little bit and let us know what happens.Wait till they get a load of me. -
try a larger carrier and a shorter spring
Comment
-
ok, if you do lower it, will it not shoot some times? or is that just your stipulation? if it wont, thebn try the changing of stuff
Originally posted by Tom in reffrence to a post saying he acted like my dad...
"That's right!
WHO'S YOUR DADDY!!"
ALL QUIT AND NO GO!!! Team Icky Forest-Shatnerball 2003!!!
www.tunamart.com
DONT SUPPORT HYPOCRITICAL MISSLEAD YOUTH, BOYCOTT HK
Comment
-
If you can't turn down the velocity below 300fps and get the gun to shoot reliably with the middle spring, then you need to go to the short spring. You may be able to tighten the o-ring carrier when using the short spring in order to further lighten the pressure of the bolt. Make sure you use plenty of oil, especially when breaking the carrier o-rings in.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
i had the same problem. just experiment with different springssigpicComment
Comment