Good deal?

[TRIAD]

Level 10 virtually eliminates ALL chopping. Yes, the bolt resets itself if it encounters resistance.

[Wierd-Guy]

I just picked it up! :) I got to pull the trigger, amazing (my last gun was a Pro/Carbine). I didn't get N2, next paycheck. Is it ok to run it on c02 for a week? Just practice shooting, not field play.

For Holiday Gifts-
Level 10
Spacer Kit
Parts/O-Ring Kit

Any other soggestions?

[TRIAD]

You'll be fine running it on CO2, so long as you have remote and/or expansion. These aren't necessary, but it will prolong the life of your seals. You'll be fine running it on CO2 for practice shooting, and should be ok in a game as well. I am not well-versed in running a 'mag on CO2 however, so others will be more helpful.

[Wierd-Guy]

Its a siphon with no e-chamber or anything like that. So, 600 air only shots won't hurt it too much?

[Wierd-Guy]

Tried it, didn't work.

[TRIAD]

With an anti-siphon tank, it SHOULD work. So long as the hose is positioned correctly when the tank is screwed in.

[Smoken]

Wierd Guy, Congrats on your new mag. Just to let you know, if you get a level 10, you will have no use for a power tube spacer kit.

[Tunaman]

Originally posted by TRIAD
With a siphon tank, it SHOULD work. So long as the hose is positioned correctly when the tank is screwed in.

Triad is MISTAKEN! You do NOT want to use a SIPHON tank! You need an ANTI-SIPHON tank! It must be set up using the exact ASA that will be used on the gun. Hope this helps.

[TRIAD]

I was just assuming he wrote siphon instead of anti-siphon, I just wasn't thinking you'd actually use a siphon tank. However, Tunaman is right, you must use anti-siphon, with the hose positioned correctly. If you are using a siphon tank, well, you'll have EXTREME problems.

[Wierd-Guy]

Yep, fired 3 shots and it froze up. I'm just going to have to let it sit there for a week. That sux.

So I don't need the spacer kit, the L10 has fixed the old problem?