mag air Q?? HELP

[jojo]

will a 68 automag work well on 750psi?
if it dose and t get a retro valve will it still work?
this is the tank im looking at

http://store.yahoo.com/actionvillage/031-4010.html

[digitard]

That should work fine ...

I have a 68 classic valve in my mag still and I'm running a similar PMI screw in .... you should be just fine.

As for the Retro, I think it wants 800 or higher .. but leave that to someone else for a final word.

Sincerely,
Dave

[ChucktheMAGician]

It will work w/ both valves, you just won't get the "bounce" on the Retro.

[toymyster]

750psi is fine for either setup!! If you want more "bounce" on your Retro, you can get a shorter on/off pin!!!