Tippmanman; they'll take care of you. I bought a 45k flatline in June, sent it in in Oct because something inside went bad (tank wouldnt hold air), they took it, fixed it, returned it with no questions asked. Just make sure you call to get an RA number first.
just about to give up... (technical help needed)
Collapse
X
-
-
problem solved :) im lucky enough live relatively close to pevs so i stopped by and got RobAGD to work on it. i dont know why i had so many problems but it was solved really quickly. yes i was aware that putting the spring pack in backwards causes the psi to rocket upwards but that wasnt the problem. some of it had to do with improper level 10 installation i think and then all he did was crank up to psi to something like a 1000. but now another problem exists. occasionally my bolt will "stop" on nothing. i will be dry firing and then the bolt just goes fsssssh as if a paintball were in the way. this only happens once every many of shots but it still could be annoying every once in a while. RobAGD couldnt say what it could be. but nevertheless im more than pleased at the results. if you are fortunate enough to live near pevs give RobAGD a visitComment
-
hehehe level 10's still giving ya trouble Rob?
did he chrono your marker? may of been a velocity issue.Comment
-
-
Chrono ?? Was that ?
Naw his mag was right at 295-300fps range and it was soild.
His LP guage is off a bit.
He is having some bolt/barrel issues with some binding. I put my big bore PMI on it and it was fine, his stock barrel was causing some issues.
I told him he needed to sand down his bolt a tad.
As to the stopping on nothing, I have a few ideas on that, I think his soleniod pluger depth os a tad long cause the sear to hand on the edge of the bolt or drag on it enough to cause it to vent and reset. I didnt have my calipers ( they went missing ) So I couldnt check his on/off pin length and plunger depth.
-RobertServing AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.
MCB Feedback +35 --+-- Automags.Org Feedback +25 --+-- PBNation Feedback +24Comment
-


Comment