Proud owner of e-mag #00439

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • warpfeedmod
    I came, I saw, I painted.
    • Jun 2001
    • 1265
    #1

    Proud owner of e-mag #00439

    But I've got a question or two, or three

    I tried putting the lvl 10 from my RTPro in there, and the bolt seems to get stuck in the body tube. I read about this in some of the other Lvl 10 threads, and the solution seemed to be sand it down to fit? Is it possible I could send it to AGD along with the marker for a tune up to have them do it?

    Also I was testing it out, and it seems that in manual mode it fires twice? Once on the trigger pull, once on the release? Is there something I've got messed up with the settings or something? Input pressure from an adjustable tank is approx 800, I upped it a bit to 900 and even went as low as 700, still does the same thing.
    My Trader Feedback
    It was the only tournament I've been to where they have more cases of beer than paint. - gimp
    Tags: None
    • warpfeedmod
      I came, I saw, I painted.
      • Jun 2001
      • 1265
      #2
      oh yeah also I got the car charger unit for the battery, but can I head to radioshack and get one of them universal chargers that I can plug into the wall? Just set the voltage and go? I assume it's 12v as that's what the car charger would be? (or am I wrong?)
      My Trader Feedback
      It was the only tournament I've been to where they have more cases of beer than paint. - gimp

        Comment

        • warpfeedmod
          I came, I saw, I painted.
          • Jun 2001
          • 1265
          #3
          took it out today and played with it..DAMN fast! But doesn't anyone know if I can go buy a wall charger from Radio Shack and use it to charge the battery? If so I assume it has to be a 12v? I know nothing about that kind of stuff.
          My Trader Feedback
          It was the only tournament I've been to where they have more cases of beer than paint. - gimp

            Comment

            • Jonno06
              AKA Jon-no wang
              • Jan 2002
              • 4392
              #4
              the double shooting did that on my mag before with retro valve,i just took the valve apart and gave it a good cleaning,and clean the sear,and body rail too..

              im sure AGD will tune it up,and sand it for you,if you ask.

              im not sure about the battery question,look on your car charger thingy for some type of voltage,then buy a wall charger with the same voltage...make sure it will work with the emag battery though...

                Comment

                • misfit
                  www.fastbuckink.com
                  • Aug 2002
                  • 353
                  #5
                  all you need is a 12vdc transformer, that black box think, i steal the one off of my air hockey table when the emag needs a charge

                    Comment

                    • joeyjoe367
                      Confirmed 11 bps RT User!
                      • May 2001
                      • 1982
                      #6
                      about the lvl10 bolt not fitting in the mainbody, Yes, that was the case in my situation.

                      Sometimes the washer in the mainbody develops burrs or something. This is easily remedied by using a round file or some light sandpaper and sanding it down gently. It doesn't take much.


                      and the double firing... make sure you cycle the gun a couple of times. if you go from 900 to 700 psi, there's 'still going to be a bit of 900 psi left in the line.

                      My Trading Feedback

                      "The only thing necessary for the triumph of evil is for good men to do nothing."
                      -Edmond Burke

                        Comment

                        • Havoc_online
                          www.havoc-online.com
                          • Feb 2002
                          • 2851
                          #7
                          your close to AGD, to save hassel, just send it to them.

                          goto RadioShack and buy a 12v(1000ma)or(1500ma) with a blue tip, it'll work fine.
                          www.havoc-online.com <--- Your AGD Lifeline

                          Products & Services

                            Comment

                            • warpfeedmod
                              I came, I saw, I painted.
                              • Jun 2001
                              • 1265
                              #8
                              cool thanks all for the info..I might just have to drop it off to AGD since I'm not to keen on filing down my body lol.

                              I'll have to hit "The Shack" tomorrow after work then for the charger..thanks again all!
                              My Trader Feedback
                              It was the only tournament I've been to where they have more cases of beer than paint. - gimp

                                Comment

                                • kevmaster
                                  Owners Group Div: Director
                                  • Oct 2001
                                  • 5475
                                  #9
                                  yeh, give her to AGD

                                    Comment

                                    Previous template Next
                                    Working...