Is it the parabolic (sp?) plug?

[warpfeedmod]

Or lack of that's causing the problem with my feeding when using the warp on my emag? It's a hopper left feed (hopper sits to left-of-center of the body?) and I've got the adapter on there and the hose is coming pretty much straight up from the warp (I'll see if I can get some pics when I get home) Except the balls are getting stuck in the top of the feed tube. I have older feed plugs I think that don't have the adjustment screws, just wondering if that is the case or not? Also I suppose I can contact AGDTech about getting some new ones? (feed plugs)

[Dayspring]

If you're using the ones that came with the warp, they should be parabolic plugs. And the set screws are inside the plug itself. It changes how much the plug sits inside the powerfeed.

I had the same problem with my warp & extended PF plug. Too far in, balls got stuck. Too far out, and it would feed past the breech JUST enough to cause problems. It takes some fine tuning.

[warpfeedmod]

but see thats it..ive got the plugs that came with teh warp and they don't have the screws on em. it's an old warp when they first came out, maybe pre-set-screw plugs?

[Dayspring]

You may have to order new plugs then. I didn't know the age of your warp. Although, a quick call to AGD may solve it. I don't know if they exchange them or not. Worth a shot.

[warpfeedmod]

okay cool I'll check it out.. thanks for the info!