arghhh sell the mag and get an imp?

[speedyejl]

A HALO B will only push through the detents if you have aftermarket ones. They are fine stock, mine has the stock delrin, works fine. Also w. mags when I got my HALO B it pushed right through my mags nubbin, I adjusted the wire worked fine, but the wire nubbin began to cut balls. I got a plastic which fixed it but, the way it works out, a stock mag will screw up w. a HALO B but not a stock Imp heh.

[PigSweat]

Actaully, my B pushes rgight past the stock detentes, but I guess it is hit and miss.

[Mr. T!]

Save your cash on an impy and get a bushy or something, not an imp. Sell your mag, save a couple extra bucks and get an emag if nothing else.

[fuzzbubble]

i love my inteliframe, so i voted for getting one of those, if you chose option one though, let me know, i might look into pickin up your mag off ya lol,

[einhander619]

get a vision imp then you wont have to worry about chopping issues due to outshooting issues. I'll be getting an imp soon, I'm thinking either vision imp or nasty imp, both with evil LPR and all the goodies.

[toymyster]

Keep the mag, get the inteli, Lvl10, and a HALO B!! If you wish to go Electro, find a nice slightly used E-mag, go Lvl10, and you'll never chop!! All of the people I know that got an Imp sold them within 4 months!!! I have seen them having strangest problems!! Of course, that's just me, You get what you pay for, and my opinion is free!! Hope this helps!!

[paintslinger]

i donno my team mate has an inteli frame and i dont see the big hype yeah its better then a benchmark but its not all super duper and praise worthy as everyone makes it out to be. i guess im just spoiled by my hyperframe... just my own .02 cents. got with the imp man.

[HIKARU]

ummm.

ok I dunno what the "issue" is here....

ok EsPo... i see you have a warp... also I assume u have the AIR valve... and NO intelliframe... is that correct? keep reading if this observation is correct...

ok well i dunno what the issue is because with your current setup your rate of fire is limited by your AIR valve... sure you can shoot rounds at a descent rate but if you want to get anywhere near an electro... well your not going to get it without paint chunks blowing out your barrel.

if you buy the intelliframe with no retro your warp will feed VERY consistantly... almost 100% consistancy... but your rate of fire is the same.. you will be CAPABLE to maintain a higher rate of fire but to actually shoot rounds at higher rates... i don't think so.

if you buy just the ReTro valve... you can definitely INCREASE your rate of fire but your steady flow of paint will not be as consistant as if you had the intelliframe. BUT you do have a warp.. so this somewhat alleviates the problem... at any given time you should have at least 10-15 balls within your warp ... so even if your loader skips on you it will still enable you to shoot fast. plus the trigger......

if you want the best that a mechanical mag can offer you in terms of high ROF and sustainability you need to get a ReTro Valve, intelliframe, and warp... and a consistant air system.

I have all the above mentioned and my gun has never crapped out on me and is the best marker i have ever used..

ok its a bit on the heavy side but thats what working out your fore arm is for.

[magnj]

go for the 2003 bushies, i was looking at imps but the bushy's have an lpr and anti chop eye( they call it pds) for only 600. Even if you have to upgrade it, it will still be cheaper, thats what im goin for.

[Mega Man]

Keep the Mag, save the money buy an Imp, keep both and be happy, thats what I did...

[EsPo]

magnj: imps with vision eye are 527 , and vision is basically guaranteeing that you will never chop again, it is a very very very respectable anti chop system, leaving you 70 dollars to get lpr for an imp.... so it evens out in the end, its basically the company you trust more.

all i am looking to do is improve my rof.. i dont think that intelli will be enough..

i will never have enough for an imp and mag...

[magman550]

I have an automag and my son has the impy. There both good guns. The bottom line is the impy throw's more paint than my mag BUT my mag is more accurate in shooting than the impy. Sadly to say I have more money in my mag than his impy. So do the math. I love my mag but the impy's could be my second gun.... Oh by the way.. stay away from bushy's.. Just my 2 cent's worth..

[845]

I would go with the Impulse Vision.

You might wanna consider a classic or ripper timmy /w clamshell. I fell in love with it even after i used an impulse. The magnetic trigger on impulses is nice though.

[HIKARU]

....

i'll simplify it this time around...

Intelliframe - gives mag improved ability to consistantly load paintballs.

ReTro Valve - gives mag higher rof.

if your ultimate goal is to have a high ROF and able to sustain this high ROF, get both parts. If you like halfassing your hobbys just get one of the above parts.

[yeahthatsme]

stop complaining and get a retro valve