2003 bushy w.PDS VS. Nasty Impy w/vision

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • magnj
    Registered User
    • Jul 2002
    • 1004

    #1

    2003 bushy w.PDS VS. Nasty Impy w/vision

    ok its either a 2003 bushy with the pds for 600( cheap)
    I dont know anythiing about bushies, but they are cheap
    Or it the Nasty vision impy with verticle mx re for about 810. O could go without the vision and go down to like 675... I could do a lot to an impy( not that you cant to a bushie) I dont know, Or keep my rt mag depending on how it performs this weekend. Telll me what u tihnk
    (by request, reset by Army)
  • magnj
    Registered User
    • Jul 2002
    • 1004

    #2
    or
    (by request, reset by Army)

    Comment

    • -Xugg-
      Accuracy by Volume!
      • Sep 2001
      • 72

      #3
      .02

      Why not buy a Lvl 10 for your RT which is the same thing basically as a $120 mini camera(anti-chop eye) on a $700 impulse.

      With all that money you can save, you can get a I-frame, warp, or whatever.

      Comment

      • Me
        Registered User
        • May 2001
        • 529

        #4
        deff the bushy. I hate smart parts, so that may taint my opinion a little.
        damn you people...go back to your shanties~~~Shooter

        Comment

        • magnj
          Registered User
          • Jul 2002
          • 1004

          #5
          im having trouble with my rt, for some reason ineed to put like 1100 psi into my gun for it to bounce, thats crazy, I just want i tto work but nothing i do helps, I dont know ill try it again this weekend.
          (by request, reset by Army)

          Comment

          • TRIAD
            Registered User
            • Jun 2002
            • 889

            #6
            How much bounce exactly are you trying to get from your ReTro or RT 'mag?

            You realize that it is actually BAD for the valve to operate like a Tippman RT. The ReTro and RT valves weren't meant to go into runaway, but rather to provide a fairly good amount of bounce to increase ROF. Also, you can change the on-off pin length by purchasing a new pin, and it may be that some of your parts are worn/damaged/etc. I would look into that before just ditching the gun.

            I say go EMag. Sell the RT and buy an emag with that money. Slap Level 10 on there, and a no-rise body or warp feed later, and you're all set.

            Try a warp, because once you do it, you'll love it for life.
            Christian, and proud of it.

            My setup, built by Tunaman:

            http://www.automags.org/forums/showt...threadid=50949

            Good Traders: Tunaman, dnm5d, vf-xx, cphilip

            FOR SALE:
            One 'cocker barrel and a pre-2k APBBOLTS anti-chop bolt. PM for info.

            Comment

            • dropkick1
              "mary" DDS
              • Mar 2002
              • 1220

              #7
              yeah, the Rt/emag valve isn't supposed to just take off on its own, more of just a bounce so you can attain a higher ROF. but i think you should either just get a LVL 10 for the RT(which is nice on my brothers z-gripped classic RT) or emag, but if neither of those, i've heard lots of good things about the 2003 bushies, but i'll stick with my lvl 10 micro emag.

              ken



              skateboard=me=8 years

              good traders:grey goose, coffeynitro, langrage, bond1313, flipirit, rogue factor, kirby, banziamf, thelar, BTautomag, Littmag, thilbo, dirtybunny, thing, xadamx

              R.I.P Zach Daly

              Comment

              • BajaBoy
                Registered User
                • Jun 2002
                • 2158

                #8
                if u cant get and emag or keep your rt then.. bushy
                RT
                Ace'd Emag (sold)
                Xmag (sold)

                Comment

                • magnj
                  Registered User
                  • Jul 2002
                  • 1004

                  #9
                  yea I hear ya, I think i decided on a non vision nasty impulse with lpr and a n ND blade trigger. Its time for me to go electro
                  (by request, reset by Army)

                  Comment

                  • Jonno06
                    AKA Jon-no wang
                    • Jan 2002
                    • 4392

                    #10
                    ide get the emag..

                    its way faster/reliable/durable/cooler/better company than both the imp/bushy added together...

                    Comment

                    • TRIAD
                      Registered User
                      • Jun 2002
                      • 889

                      #11
                      Emag all the way. AGD hasn't let you down, so why would you abandon their products?
                      Christian, and proud of it.

                      My setup, built by Tunaman:

                      http://www.automags.org/forums/showt...threadid=50949

                      Good Traders: Tunaman, dnm5d, vf-xx, cphilip

                      FOR SALE:
                      One 'cocker barrel and a pre-2k APBBOLTS anti-chop bolt. PM for info.

                      Comment

                      • personman

                        #12
                        If I had a choice between the two of those, I would defentally pick the bushy. For some reason I trust ICD more than smart parts?

                        Comment

                        • Automaggin2
                          Registered User
                          • Sep 2002
                          • 2506

                          #13
                          the new bushys are AWSOME. but, if you want a impy, i would look into the rat impys, you can get a black one for 600 and they are awsome. They come loaded with a freak, blade trigger, new bolt, new lpr, new EVERYTHING. www.e-paintballoutlet.com
                          Dub V

                          Where greatness is learned
                          and couches are burned

                          Comment

                          • Nitroduck
                            Registered User
                            • Jan 2001
                            • 726

                            #14
                            All the b2k3 owners i've talked to put them on the level with gz intimidators and ir3 angels............ Some of them are even selling thier angels/gz timmies cuz they don't use them anymore due to thier b2k3s. I think that says alot if you're gonna sell a $1300 angel to use a $600 bushmaster.

                            I personally use a sonic bushmaster (it was either that or a emag/xmag) and love it to death, its one of the lightest guns i've ever used. The only downside on it is the fact the stock board is set at 14.9bps and i can't hammer on the trigger like i can my angel, but i guess that's good becuase i've had to massively turn my angel's down cuz my xboard revy can't keep up.You wouldn't have a problem with a b2k3 though cuz of the PDS. I'd take the b2k3 becuase you can turn the eye off........eyes have always been prone to going down ( even ICD says that ) So if anything happens you can turn it off ( try using a vision with a broken ball in the eye ,the gun will start getting really really gooey)

                            Nother great thing with bm2ks are they're crazy efficient on air, i'm getting 3000 shots per tank fill on my 88/45, and my team mates are getting around 1000 on a 68/3k tank. ( one has a 1st gen , other has a 5th )
                            Former stickballmovies guy (They're on youtube now). Now a full-time slumlord in Central Ohio.

                            Comment

                            • Mr. T!
                              Registered User
                              • Nov 2001
                              • 379

                              #15
                              The difference between a Bushy and an Imp are like light and day. Get the Bushy, they do not need any mods out of the bow like the imp does (LPR, bolt, hammer) to shot great. Plus, Bushies are cheaper and work better (no bolt stick). Go with the bushy, you won't be dissappointed.
                              Your Mother is a Slot

                              [url]www.Paint-BallAction.com[/url
                              www.TheAngelGuy.com
                              www.Angel-Owners.com[/color]

                              Comment

                              Working...