Level 10 question(not realy technical)

[acecl22]

I just installed my level ten and the velocity is an insane amount in with the medium spring, i was just wondering if this is normal, go here

http://photos.yahoo.com/bc/acecl22/vwp?.dir=/My+Photos&.dnm=MiniMag.jpg&.src=ph&.view=t&.hires=t

[Load SM5]

link does'nt work..define "insane amount".

[acecl22]

there are not many threads showing out of the gun

[Load SM5]

On the velocity adjuster?

[acecl22]

yeah

[Load SM5]

What's your velocity? Shooting 280's with it that far out?

[acecl22]

not exactly sure, dont have a crono, havent been to the field, it only works with it like that, with the shorter spring it sticks like crazy

[Load SM5]

You may be just fine. It may be cycling but shooting really low. Take it to the field and chrono it when you get a chance. You should'nt get bolt stick with the shorter spring, though. Are you using the loosest carrier without a barrel leak?

[acecl22]

so you think it might be normal for the velocity adjuster to be in that far

[Load SM5]

You do have to crank the velocity down a good bit to get the gun to chrono to 280-300 with level 10. It's normal. If it way too far or you bottom it out before getting 280-300fps you may need a new spring pack. Hard to say without a chrono.

[acecl22]

okay thanks

[Load SM5]

Anytime bro. Hope it works out for you. Yell if you have problems.