Black Dragun + Warp Feed

[Shirow]

Got a problem.

My friend bought a warp feed, but the vertical feed connector for it won't fit onto his black draguns feed neck. Anyone know of an adapter or a way to connect the warp up to his gun?

[BTAutoMag]

i had mine connected to my warp. i stuck 3 warp rngs on the end of the tube and wrapped it in strips of news paper until it was a snug fit

[xen_100]

I connected mine the old fasion way. Just cut the dragun feedneck so the 90 degree adpater would clamp on.

[BTAutoMag]

yea but you can use the vert anymore.

[xadamx]

use electical tape untill its snugly fit.

[xen_100]

Originally posted by BTAutoMag
yea but you can use the vert anymore.

ya, but once you use it with the warp, you wont want to use it vert ever again.......so it doesn't matter.

but if you really did want to switch it back. just buy an evil smoke stack. it fits on the kingman verts(instead of that stupid vert elbow) it will also fit on a cut dragun vert.

[BTAutoMag]

alright. i sold mine really quickly because the battery dies atleast once every day of play and i ALWAYS had to recock it. i try to keep all of my low level guns in perfect condition so that the retail value is still around what i paid for it

[-=Squid=-]

I believe you can get a PTP feed adapter thats vert feed, but nothing plugs into it. Look around, they look kinda like kingmans verts.

[magmonkey]

I will post a pic of the 90 adapter i built for a friends dragun

[Shirow]

I think he's pretty much decided he's just going to saw the top of the feed off, but thanks for the info. Looks like that's pretty much the only way to do it, non-ghetto style.

[folder504]

Simply cut off the pinch nut of the 90* adapter on the warp and stick it down the vert feed. That's what I did to put mine on my Rainmaker.

[ben_JD]

You can buy a Sypder vertical feed tube and insert it in the place of the current "big mouth" Black Dragun tube. It take a little sanding on the side of the tube, but it is basically the same part. That is what we did on our Black Draguns before they died. And died they did.

[boomerfoxtrot]

out of all this no one has given you what you want..

here..

http://www.paintballkingdom.com/product.asp?0=227&1=234&3=370

it's the PBK M3 Warp Feed Low Rise Adapter.... =]

$10... so don't cut anything... or getto rig it..

[danheneise]

two questions. one, does the warp have to be connected to the triggerframe or is it like a sensor inside of the warp?
two, could someone post a pic of their trigger frame open with a warp hooked up to it? i just wanna see how you rigged it to the board.