questions on bench mounting & testing a paintball marker

[sbikeclix]

im doing a science project on how different length barrels affect accurac &ditance at different pressures. a couple of questions:
1) what do you think the lowest pressure i could run a stock spyder at ?(i have a geddon with gen-x regulator, so i can pretty much go to any pressure, and i have to use spyder b/c thats the only way i can get a 2 piece-barrel with different lengths to fit)
2)how would you benchmount it properly
3)what would be the best distance to test shot grouping at?
4)a question about a light sensing chrono, as that will probably be the only chrono i can get to, should i use it in shade or direct sunlight?

[FeelTheRT]

is this test aproved? I find it hard to believe that you can bring a paintball gun on school grounds..

[sbikeclix]

to clarify

im doing the test at home, b/c its a science fair project. but i will be showing the results at the science fair, obviously

[DarkPhoenix]

I recommend doing the test in the shade, or at least away from dirrect sunlight, as it might interfere with your findings.

Benchmounting must be done with a vise. I have a portable plastic vise with tough rubber bumpers within the grip to prevent scratching and improve resistance to movement. bought it from the home depot. I recommend using a stable workbench and vise.

I recommend 25 and 45 yard ranges, to illustrate accuracy at different ranges via measuring the size of shot groupings, each shot grouping consisting of a group of 30 paintball per target.

[DaXtremeist]

jeez a bunch of kids are doing this test......
a kid down here in florida at paintball park was doing a similar test using different brands of paint

[sbikeclix]

well, i figure that this will be realtively easy to research, fun to do, and will prove a very important point to the new paintabllers at my school- longer barrels dont help range