Slug ? and Spec's

[FESTUS33]

I have a Slug body sitting in front of me
right now, and a Bridgeport mill in the
basement ready to go. I've been a machinist
for close to 20 yrs,but I have several ?
before I start on this project.

1- What is the exact thread for an Angel
feed neck, I'm thinking of making an
oversize No-Rise so I can mill it as
part of the finished body.

2- Barring that does anyone know where
I can get a No-Rise neck in the white.

3- I intend to use a cocker ball detent,
how much meat do I need to leave in the
side wall to get the proper depth on the
detent.

4- What is the easiest way to get the
barrel detent aot of my rail w/out
messin' it up.

Festus {Dam This Tube Is Sexy}

[mxracer33x]

So basically on a sluggo body nothing is threaded yet when it comes from AGD?

No Cocker barrel threads yet?
No angel Feedneck threads?
And The one i already knew, No ball detent threads.

I was going to Purchase a body to mill, but I dont have time to fuss with all the threading if it needs to be done.

Festus could you verify this for me?

[bofh]

all it's missing in the detent thread.

He's asking for feed thread specs so he can do something custom and replace AGD's threads...

[FESTUS33]

No I don't want to replace AGD's thread's
But if I turn my own feed neck I need to
know what the thread size and pitch is.
And yes everything is threaded except
the ball detent hole.
All in all one sexy piece of aluminum.

[bofh]

AH, I must have read it wrong. TAG must know the answer. :)

[FESTUS33]

It's already threaded for all but
the ball detent.
What I need to know is what size
and pitch thread the feed neck is,
so I can turn and thread an oversize
neck.
Festus

[mxracer33x]

I know the threads are metric, but i cannot remebet the exact specs, somehow 20.5mm keeps coming to mind though

[SlartyBartFast]

Download the Slug CAD file.

The CAD file gives the feed tube threads as [M21x.75 6H]

Hope that helps.

[FESTUS33]

Thanx Slarty that answers at least
one of my question's.
Festus