Hi I along with many people have been trying to find some blueprints or drawings of the body and body rail for the pumpkit so that we can cut the newer parts to fit the pump kit. It would help alot if you could provide these prints or let me stop by the factory and borrow a body and/or rail that you are throwing away with the slots and measure it
-
Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308 -
if you go to www.airgun.com and then the tech support area there is a diagram somewhere with all the demensions you need.[*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
Image too large- Tato -
I looked through all the diagrams and all i found was one pic and it had no picture of body. 1 pic of rail but measurments at all.Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
up!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
up!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
i dont know if you did, but if you search i remember a recent thread where someone posted an annotated drawing of the pump rod (or whatever piece doesnt come with the kit)Comment
-
I don't need the pump rod. I need the Rail and body with pump holes in them.Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
UP!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
Tough problem, ask me again after the new year we are just to busy with end of year stuff right now.
AGDsigpicComment
-
UP!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
UP!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
Here are the pump slot dimensions for the mainbody. The dimensions are the same for an Automag body.Comment
-
Thanks! Expect to see me stop by AGD to pick up one of those X-Valves!Now all we need is the rail.Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
-
Here is the rail. I think everything you need is here, if not let me know.Comment
-
Thanks!Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308Comment
Comment