Hey Tom look here!

[ezrunner]

cocker-mag?

Are you building a cocker mag?

I would love to see the mag done with a larger diameter
powertube and an lp pnumatic set running the bolt.

How cool would that be? You get the speed of a dumpvalve
system with the characteristics of the cockers.

Tie a ram to the pump arm, and
a solenoid to an lpr and go!

I wanna build one now....:-)

If you are interested lmk, I have a slugg body I'm working on and an RT valve and 2 rails as well as an intelliframe.

I think that I can put the solenoid and morlock board in the grip and actuate the switch by the sear, like intellifeed.

Hmm..... this is looking easy to do!.

-rob

[ezrunner]

AAH!

AHHA!

With the RT valve, mount the 3way/4way (shocktech bomb)
in the grip, vertically and hinge the actuator rod at the
sear or use an angled slot, then the rt can actuate the
3 way w/o short stroking.

Then it can stay mechanical, and still have the speed.

This could be really cool.

-rob

[Snake847]

LOL no. These are cutting specs to fit the pump kit to the newer body and rail for automags!

[ezrunner]

yeah,

but who wants to actually pump it?

that is what pnuematics are for, ask Glenn Palmer!

:-)

-rob

[Snake847]

Why would you put penus on a mag? If you want it to be semi just take the pump rod and the spring behind the bold off and you got the semi mag.

[the123]

Guys- i know of a place with those old rails IN STOCK. They are out of black however.
As for the mainbody, you can probably pu an ad up on the forum looking for one. Lots of people swapped out their original mainbody for a powerfeed or warp or no-rise.
PM me if you'd like to know where to get some...
Brian