My Emag LX was horrible today

[PsychoMag]

I shot my LX emag today and it was horrible. I was breaking paint everywhere, noi matter what brand, and what insert. I tested the LX mod and it seems to be working pefectly, my warp and ricochet had fresh batteries as well. Has anyone else had this happen?

I tried...
32* competition
Team Colors winter fill
PMI Bigball
Diablo Midnight
RecSport
Evil
and Arctic Inferno...

[mykroft]

Where was it breaking?

Sounds like you had barrel breaks galore, likely due to excessively fragile paint.

[PsychoMag]

Yeah...it was 48* and sunny most of the day, even the winterfills were breaking. My gun was a blender, and this has never happened to any of my mags before. I have been using this setup for a long time now, and it only did this today. I used it 2 weeks ago in 35* weather with RecSport and it shot perfectly, not a break...

[manike]

Did you check your nubbin? Sounds like a broken wire nubbin.

manike

[SyntaxError]

Were you using a Freak? Interestingly enough I had the same problem using a perfectly sized Freak insert in the same weather. I switched to the stock barrel and it shot fine...The freak is just not doin it for me lol

[Stupi]

It's kind of funny (in the odd sense) that this happened to you. My worst day of ballin' ever was yesterday with my Warped LX E-mag. I sat out almost the whole daying trying to figure out what was wrong. It broke paint every single time I fired, and went out to play. I've since switched carriers and dwell time on my Warpfeed, and I think it's working now. I'm going to get a plastic nubbin for my Boomstick before I go out next Saturday because I'm not ruling out the nubbin as a problem just yet, but I fired about 100 rounds today at full speed without a single break. I was shooting marbs yesterday, so I'm quite angry I wasted such expensive paint, and field refs were nice enough to let have 500 rounds of Blaze, which broke just as well

[xmetal2001]

Same thing happened with my friends Emag LX with Warp and Freak... Using plastic nubbins. Weird.

[AGD]

Cold weather historically dries out the paintballs and makes them very fragile. Do a bounce test before you play, you will probably see that they are really fragile.

AGD

[dropkick1]

i played yesterday with my micro emag and lvl 10 and it shot perfectly fine no breaks at all, i just gotta switch the carier b/c it wouldn't fire occasionally untill i pulled the trigger a few times, but it was fine and i loved it.

ken

[SyntaxError]

Originally posted by AGD
Cold weather historically dries out the paintballs and makes them very fragile

What about that RP Advantage shelled paint? Isn't that already called "dry-shell"? Besides if I'm using a warp, which I'm not, are there any disadvantages to shooting the dry shelled stuff? If so I haven't seen any, so wouldn't you want the paint to have dryer shells?

[Brian68mag]

my LX emag did the same thing 1 week ago, blender bad, and most were chops. The 68 mag chopped too, the carbine didnt so i used it.

[GeoffreyInNJ]

I had some trouble in cold weather with the Level 10 and a freak combo in cold weather. I switched yesterday to a CP 14 inch .685 barrel, I bought for cold weather play, and it was great. It had one of the new plastic nubins installed and paint was being fed through a VL X-Board Rev to a warp feed. Yesterday I only had one barrel break with some crappy Severe paint and I shot about a case of paint. It was tiny and dimpled as hell, and didn't really shoot very straight, but I got relativley consistent velocity (285-300)and one break. I guess the temperature was in the 30's to low 40's

When I was using my freak a few weeks ago, it was giving me all kinds of trouble though.

Try using a differnet barrel. I got mine directly from CP, as everyone only seems to carry the .689 version of the barrel for retail.

Good luck

[sniper1rfa]

i hate the "advantage shell" stuff with a passion. when it shoots, its great. unfortunately, ive played with one gun (a [single, one, not the others] cocker) that allowed it to reliably leave the barrel in one piece. my warp doesnt mind it though.

[PsychoMag]

I checked my nubbin and replaced it just in case, I even smoothed out the nubbin with fine grit sandpaper. I didnt try the stock barrel only because Ive never shot the stock barrel. I did try my 12" AllAmerican though with similar results. I have broken the gun down and rebuilt it from scratch l;ast night, retuned the LX kit, I can put my fiunger in the breach, so it works, and it is still breaking alot of paint today...I dont know what coulda happened to it. I was one of the first LX kits sent out, it has totally rocked without a break, even when we played in snow a few weeks ago, yet yesterday, it was an embarrasement, with over $2500 invested.

[manike]

Did you do a drop test on the paint?

I had some problems with my gun breaking paint a few months back. Couldn't understand it...

Then realised the paint was just falling apart at the seems and every ball would break when dropped from a foot. (you could squeeze it in your fingers and watch the seems open up!)

Everybody was blowing it apart in the guns, Intimidators, Cockers, Matrixes and X-mags.

It was all down to the rubbish paint.

manike