My friends and I went out yesterday to play. We brought along a scuba tank that one of them has. When we went to fill our tanks we each only got 1000-1500psi.(We all have 3000psi tanks) He said you only get that much (3000psi) on the first fill and everything after is like 2500psi or below. Is there anyway to get a full tank fill everytime? Or will it always be this way? I have a Pure Energy 48/3000 tank. Thanks.
Filling your tank
Collapse
X
-
Filling your tank
All Black Automag
Flat Black Blade Intelliframe
72cu/4500psi Crossfire Nitro Tank
10" Dye Ultralight
12" Dye Ultralight
12" All American
14" Tear Drop
Macroline hose kit
KAPP Drop Zone II
CP Mini Gas-thru
EVLution II
X-valve
ULT
LOOKING TO SELL IT!Tags: None -
the best method short of getting a compressor or a booster is to use the cascade system
the cascade system works something like this: you have three or so tanks, you fill from the first one as much as you can then you go to the second and the third, this gives you a good sized fill from scubas.[*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
Image too large- Tato -
Yup, what he said.Good Traders:JoeyJoe367, Blazestorm213, RetardedRiceBowl, rsadich,PaInTbALL zAcH, jwyke. John Dresser, Xas, Darrikws,whydoineedausername
Splat Attack Revenge V2 LE FS
Conquest FSComment
-
Not to sound dumb but...huh?All Black Automag
Flat Black Blade Intelliframe
72cu/4500psi Crossfire Nitro Tank
10" Dye Ultralight
12" Dye Ultralight
12" All American
14" Tear Drop
Macroline hose kit
KAPP Drop Zone II
CP Mini Gas-thru
EVLution II
X-valve
ULT
LOOKING TO SELL IT!Comment
-
yeah I kinda didnt get what you said either lol
My Trading Feedback Thread Great traders: PaInTbAlLeR476, Shrapnel, Magdude, I <3 Mags.
Setup:
Polished Minimag Body
Retro Valve
Intelliframe
Level 10
AGD clear Warp feed
12v RevvyComment
-
What he means is that you have to have 3 scuba tanks, mark them as 1, 2 and 3. When you ar going to fil an empty 48cu tank, hookit up to the scuba 1, fill as much as you can, then move to scuba 2, and so on. This will help mantain a higher presure on the scuba 2,and 3, thus you wil be able to get higher presure fills, but it wil never get to 3k after the first fil.Comment
-
that work desent w/ just 2 tanks? cause paying like 500 bucks for 3 scuba tanks and a fill sation, well for just you, that's alot of money and you're gonna have to play a while to get your money back, yes i know around here it costs 5 bucks to get a scuba tank filled, where to get the same amount of fills it would be like 30 bucks, but 150 bucks per tank, and 50 bucks for a fillstation adaptor thing...might be a heavy start up fee don't ya think?AIM- TheJester493 IM me some time
take a look at my minimag
....
http://www.automags.org/forums/showt...threadid=64837Comment
-
the best way is to get like 3 tanks, but you don't need to. me and 4 of my friends bought one scuba tank, we fill it for $4, then we all get a full day of play out of it, about 3 fills each, and by the end of the day, the scuba tank is down to about 2000psi. If you want just a "cheap" solution, get a few friends together, and all buy it together. Much cheaper and in the long run your investment is paid off. I know it costs $3 to fill my 48/3k at my local pball store, so getting 3 fills a day for $1 ($4 for total tank split 4 ways) is saving $$ up the wazooYou can run, but not @ 280 f.p.s.
Team Hyperfire
2k2 Silver Chrome E-Mag
Level X Superbolt II
SP Freak with Silver Front
KAPP dz3
68/3k n2Comment
-
Comment
-
NO matter what you do when you fill your tank up from the scuba, the pressure is ALWAYS going to drop! This is just plain logic; if you take some of the air out of a pressurized tank, it loses pressure, because less air is pushing out trying to escape. so, while a 2 cubic foot scuba tank sounds like a lot of air (and yes, it is) its just not as much as it sounds at first, because you dont keep getting 3000 psi fills, the pressure will go down every time.
My Trading Feedback Thread Great traders: PaInTbAlLeR476, Shrapnel, Magdude, I <3 Mags.
Setup:
Polished Minimag Body
Retro Valve
Intelliframe
Level 10
AGD clear Warp feed
12v RevvyComment
-
you only need 3 tanks
not 3 fill stations....Comment


Comment