what do i need to do to this mag to make it pump?

[EsPo]

well, i know i need to cut a slot in my body rail, but is there something i need to do to my mainbody? also, once i made my mag pump, can i take the pump kit off have it still work as good as it did before?

[FalconGuy016]

I dont think it can be pump because of the way the barrel works

[SpongeBobSquarePants]

yes mags can be pump your preformance shouldnt change when taking the pump on and off or well a friend of mine has no problems with his

[mykroft]

Falcon Guy, there is a kit that was once available to make a Pump Mag.

Espo: The slot's the thing you need. And if you completely remove the pump kit it will work fine as a semi.

[Xerces]

partial ones are still available on the agd online store. to change it back to semi, you need to replace the blue bumper, and remove the pump rod. for awhile i just used the pump handle instead of a foregrip, feels comfy

[SilverFox]

check out my thread about the pump rods you need to complete those mentioned pump kits.

[HoppysMag]

buy a sluggo and make a stock class body. or buy a used vert feed, chop off the feed make a stock class block and feed tube and mount it to the body rail , so basicle copy this guys.

http://www.paintballmaxx.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=000560