Flatline tank on a Drop Zone 2?

[painball]

I was wondering if it fits when you remove the dovetail or whatever it is that comes with the tank.

This is to all you flatline owners. How do you fill em? I am pretty sure you just connect to a 90* fitting to get the air to your gun but how do they fill em? (those type of adjustable tanks comfuse me)

[TheTramp]

The flatline has a standard fill nipple on the side of the reg.

[painball]

thanks but you didn't answer my main concern

[TheTramp]

It has a clamp assembly that holds it onto the AGD drop. You can get an adaptor to allow this set up to be used with other drops.

As far as the drop zone goes, I don't see why you couldn't remove the clamp assembly is comes with it and clamp the dz on at the same spot. The AGD clamp is much wider (at least an inch) than the DZ (around a 1/4 inch?) so it might not be as stable with the DZ.

[painball]

ok. which drop works well with a flatline and 68classic?

[TheTramp]

Are you looking for a long or a short drop?

I like a short drop so the standard AGD drop it comes with is prefect for me.

If you want a longer drop you'll have to get an adaptor or use a cradle type drop. The DZ is one of the longest cradle types I believe.

[rikkter]

of course it doens't need to be offcentered like that.

[painball]

so it will work with a DZ2?

[misfit]

2 things the dz2 didn not fit properaly on my 88/45 flatline, i think that the reg is a different dia. then the dz2's clamp.
im also pretty shure you shouldnt clamp a tank around the neck of the bottle, at least thats what it looks like in the picture