RT PRO

[Runner]

Im looking to get an RT PRO and i had a few questions about it. First off I wanted to know the dimesions. Like hieght, lenght, and wieght. I also wanted to know what version should i get if i am going to get a warp-feed. And the last question: Im getting the flatline nitro system. What else would i need to buy to hook that up?

------------------
:insert whitty comment here:

[magman007]

well it all depends, first off height is determined by what feed system you get, i have a vert feed so it is a little taller, for a warp setup get a hopper right body ,and to totally pimp it out, get a freak system

------------------
you ever notice how elves do everyting???

[DarkPhoenix]

For the flatline bottle to get hooked up, all you would really need to do is remove the bottle adapter from the bottom of the grip frame and unscrew the ss braided air line and elbow. Remove the bottle clamp from the flatline reg, and mount the drop forward to the grip frame. Screw the elbow and ss braided airline onto the output of the flatline regulator, remember to position the angle of the elbow so that the braided line does not get in your way. After you have installed the airline, you put the regulator back into the dropforward reg clamp and tighten it down. There is really nothing you would need to buy to mount the flatline bottle, you might want to have a quick disconnect fitting installed on the elbow of the bottle, to help in removing the bottle. There are also other products such as the drop zone II drop forward, as an alternate drop forward. You might also want to look into purchasing the cp flatline adapter, which allows you to use any rail-type dropforward. Another thing might also be changing the ss braided airline into a micro or macro airline. Personally, I like staying with the stainless steel line which came with the gun, it is much sturdier than any micro or macro line.

------------------
RT Pro P/F
w/ AGD Flatline

[Runner]

Thanx Guys.

------------------
:insert whitty comment here:

[Dubstar112]

here is a pic of my mag with flatline.. i should have took the pic on the other side, but i used a 12inch ss line and a qdc.

it was long but you can simply buy a macroline kit and fit it to your likes, now i have my forgrip gas thru.


edit: haha, um my pic doesnt really help does it


------------------


[This message has been edited by Dubstar112 (edited 08-29-2001).]